Search results

So quick update Ended up doing the cv boots myself with new grease and they seem to be fine Used Outers Kelpro CIB-230 Inners Kelpro CIB-516

The response back from Mark at CV center was as per below Unfortunately we can only service and reboot these driveshafts, I hope that’s all they need. To do this service you will be looking at $132 inc gst. Pretty cheap to service them however, may roll the dice and drop them into him when I...

A1 Driveshaft repairs has come back with $220+gst per Axle so a total of $440 +gst to rebuild the rear end

Quotes so far to rebuild (emailed every Driveshaft shop in Melbourne) MS driveshafts: Rear Driveshafts Reco Mitsubishi Lancer AWD Cost $500 x 2 LHS & RHS (not sure if that's $500 for the pair or each!) I may just bite the bullet and get a boot kit along with a front inner/outer CV...

I might be looking up the wrong part number but this is what I found for new ones https://www.amayama.com/en/part/mitsubishi/mr195538 Thanks for the tip on a reconditioning place will contact some and see what they say, happy to rebuild them myself if I can get parts :s but if its $100 a side...

Hey all done alot of googling and searching but drawing a blank Does anyone have any guidence on parts info so that I can rebuild my rear axles and cvs? not really keen to pay 800 per side for new ones, alternatively anyone know a more cost effective replacement part? If I have to buy new...

Appreciate the guidence, didnt realise the later model ecus could do speed density. Sounds like it might be a go and ill just get larger injectors for future upgrades. I have done tuning on quite a few cars on links and megasquirt etc so happy to tweak tunes, jsut means I need to get the tuning...

Hey all, will do an intro shortly Just a quick question around the rvr engine If I was to use an evo 2 loom (changing plugs/pins as requird for the rvr sensors etc) on the rvr 2g engine and switching pin 33 and 8 to suit the rvr ecu would that work? I am happy to do an adapter for the rvr...