Search results

Lately i have been sending so much gear lately i have had plenty of practice! And yeah do plenty at work too.

the calipers have got some factory looking pads in them which will get you started or out of trouble, wouldnt think they are anything special. the pads are the db1223 the same as magna/evo 123and 4. the calipers are series 1 legnum, which are kinda half evo 4 and evo 123. they take the same pads...

Brake sold 5 stud hubs still available

No cheapest i would do would be $400 to you.

PM sent mate.

Mate of mine has fit them under his 15 inch wheels with some very slight grinding of the caliper. But i would advise a 16 inch rim to make sure. I have some work 16 inch. And legnum 16 inch and both fit fine. The calipers dont really stick to far so im pretty sure any 16 or 17 inch wheels would...

pretty sure the gsr have the banjo bolt ends on the hoses (the one that the bolt goes through a fitting on the end of the brake line), either way i have the brake lines with the calipers anyway so if yours didnt work, can use the ones with the calipers which will go to your factory metal line.

Item: brand new evo x front brembo calipers Item Condition:brand new (few small chips in paint from being handled Price:$1100 ono NOW $850 NEED THEM GONE Extra Info: see below Location:Adelaide Preferred Contact Method:PM or email: [email protected] Pictures:leave email for pictures, ill try...

sent pm on face book dude.

updated items sold.

surely someone wants a cheap easy upgrade? discs are like new, can provide like new pads also for them?

yes mate, under the rubbers they have a circlip, and then they press out. but we couldnt find direct replacements, it had to be machined out to take new ones, but it was very little that had to come out.

cairns dj and paul, i have pm'ed you both. alt relco, and lower control arms and filter sold intake and filter on hold

PM's replied the Alt relo kit is now sold anyway. but i would have presumes it would have been ran off of the balancer where the ac belt comes off? there for no need to cut or shave the engine mount section, have never seen them done like that before. can see why you could run it off the ac bit...

PM's replied Alt relo kit sold not sure what you guys mean when you say engine mount is in the way? which engine mount is in the way? you usually remove the ac compressor, and use this bracket to mount the alt in its place? belt would be slightly diff size due to pullie change but other than...

alt re-locator kit on hold. sorry guys i dont know to much about it, i never got to fit it myself. it came from bazeng, so i dare say its a vr4 style mount.

hey mate, not sure if your still chasing any of this gear or not. but i have a oil filter relocator changes it to run a normal ford z9 filter which is large and cheap and same specs as the mitsi filter. also have some front fto hubs which you can use for 5 stud conversion, might even be able to...

the rvr manifolds are exactly the same beside the tb flange is 54mm instead of 60mm, only takes a few mins with a die grinder and a burr?

if you still need anything, i have the compressor, bracket and tensioner if you need it send me a pm.

Item:Evo 3 front lower control arms (pair), with brand new ball joints SOLD Item Condition:very good, brand new ball joints Price:$200 pair Extra Info:had a engineer slightly machine out where the ball joints go to fit brand new ball joints (can only order complete arms from mitsubishi) these...