Search results

I have a Mitsubishi colt with a gen 2 GSR conversion. Around 6 months ago (5000 miles) I installed an AEM wideband, the idea was get this fitted before I start playing with other stuff. Until a few months ago it was working perfectly and other than running leaner than I'd like on a hot re-start...

Attached is a picture of a plug - they all look the same

Thanks for the replies. My wideband is an AEM UEGO gauge with the Bosch 4.9 LSU sensor. It is mounted in the exhaust at about 10 I clock to prevent moisture from killing the sensor. It was brand new when I fitted it about 6 months and 3000 miles ago and worked faultlessly until yesterday. I am...

Hi all, I have a Colt/Mirage which I have done a gen 2 GSR conversion on (4g93T). I have an AEM wideband fitted just before the cat which does nothing except for give me a reading inside the car. Up until yesterday I hadn't had any problems and it would happily sit between around 14.5 and 14.8...

thanks guys i looked up the turbosmart one and then found this: http://www.bluepower.se/en/article.php?id=8116&art=5210468 Looks the same to me but mine is obviously missing the little trumpet bit off the side, when ive tested my engine it seems to hold boost OK so i'll probably leave it on...

This is the BOV that came fitted when i bought my gen2 4g93T, it has no brand name or any information on it so i think it would be a cheap unbranded one but would like to find out

yeah we have a pipe bender in the workshop and a mig so I can weld stainless OK, we don't have any stainless mig wire at the moment but i welded my exhaust flange on without stainless wire and it is still holding no problems it will just not last as long as the rest i guess. For engine bay...

cool thanks, it will mount up fine but i'll have to cut the bumper out abit to get it to sit right but that's no biggie. Just bought an evo 5 front mount so hopefully that will arrive next week! Also treated myself to a nice big radiator and some other goddies! I should really stay off ebay...

Not sure if this is in the right area so feel free to move. I have a colt/mirage hatchback that I have fitted the gen2 4G93T lump into, currently run the oem sidemount intercooler but looking at getting a front mount before i get a respray as I will probably fit the bumper around it. Most kits...

In my experience, cat temp sensors are used to make the engine run rich until it is up to temperature. Manufacturers started fitting them as legislation began changing to account for cold starts which meant the cat was not fully functional so they had to find a way to get heat into the cat as...

cheers lads, ill try that tomorrow and good tip with the self tappers. Does it sound to you like a leaking crank seal? It is not coming from above it for sure and im 95% sure it isnt from the sump itself so can't see where else it would be from

I suspect my crank oil seal may be dripping oil out on my 4G93T GSR, I thought it was the sump at first but after I refitted the sump twice thinking i had messed it up it is still dripping from the exact same place, directly under the the crank pulley. Unfortunately my impact wrech which i use...

Thanks everyone that's alot of help! Yes correct the ecu is a 4 plug affair, the plugs from my engine loom physically plug into an evo 7 ecu no problems but a correction harness needs wiring up to correct a few pins that do not match up correctly, the fan is apparently one of them amongst others

Cheers guys that's helpful, yes the colt is what i think you would call a mirage over the pond with you. here is a picture of it almost ready for the road :)

Hey guys! I've browsed your forum for a while now but never really posted as found most stuff using the search but I wanted to ask a few questions regarding running my gen 2 4G93T on an evo ECU. I have a GSR converted CJ colt which is almost road worthy now and although I have a degree in...

Ive got brembos front and rear on my colt, I also wrote a tutorial on another site on how to do so if you would like me to post it on here as well? i use fto trailing arms with galant 2WD rear dust plates and handbrake mechanism at the rear, the standard colt handbrake cable worked good for me...