Search results

With the trims you've given me, your gt2871r has compressor wheel with 49.20mm inducer and 71mm exducer. Turbine wheel with the trim 76 has 53mm inducer and 46.2mm exducer. And you have options of having .64 A/R or .86 A/R exhaust housings. 16g td05h has a compressor wheel with 48.3 inducer and...

Gt2871r is not a disco potato. Gt2560r is equivalent to s14/s15 t28 turbo Gt2860r (disco potato) has bigger turbine wheel but same or similar compressor wheel. Gt2871r has same turbine wheel as disco potato (gt2860r) but bigger compressor wheel. There are also three different trims from memory...

Nothing much to see but it was good to line up four GSRs http://youtu.be/0bh-1umjMsg

HG vr4 throttle body, different tps that has a pigtail instead of the connector on its body, mouth is smaller and on the angle. the elbow is also a separate item HH vr4 throttle body is the same shape/design as HG however it takes a TPS same as the one that's found on evo123/cc gsr etc evo...

As above plus evo throttle body mouth is part of the throttle body and is 2.5in in diameter compared to vr4 that has a separate mouth/elbow that bolts to the throttle body and its diameter is approx 1.75in. Closer match to evo tb is from galant gsr.

Both are 60mm however they are not the same shape.

Any pics of arc exhaust heat shield and airbox?

I've been offroad in few of my GSRs, definitely lots of fun :D

On a cb lancer you need to split the hub in order to replace front rotors. Its a good opportunity to replace wheel bearings also ;)

Found one on the net, if its not the same, I wont mind to have a different copy, you can send it to [email protected] http://www.mitsubishi-motors.kiev.ua/Manuals/Engine/pwee9502/11A.pdf cheers

hey guys, just double checking if torque spec for 4g93t conrod bearing cap is 20Nm + 1/4 of the turn? this info was found on evocoupe.net cheers Peter

Maybe.. depends on your offer and how soon do you need it?

They sure are great engines, the plan was to build 4g93 mivec and drop the motor into a different body but unfortunately no time.. It was defected for steering wheel and air filter not being securely mounted however its still regency defect.

Selling my old school ca lancer with 4g92 mivec motor. For more info and pics refer to link below. http://www.gumtree.com.au/s-ad/morphett-vale/cars-vans-utes/mitsubishi-lancer-4g92-mivec-tuned-on-e85-microtech-lt-8/1061506262 Thanks Peter

I'm in need for a evo 1-3 timing belt side engine mount, piece that bolts to the chassis. thanks Peter

Pictures of the air box?

Garret GT3076 TURBINE Inducer Diameter: 55mm Exducer* Diameter: 60mm COMPRESSOR Inducer Diameter: 57.0mm Exducer Diameter: 76.2mm TD06SL2-25G TURBINE Inducer Diameter: 54mm Exducer* Diameter: 61mm COMPRESSOR Inducer Diameter: 60.2mm Exducer Diameter: 78mm (Copied from evolutionm)

+1 what Dougmo said btw love your username haha :P Pozdrav :)

Sure do :) pm sent All sold, thanks fellas!

one sold to EVL20T and two to Rockabilly pm sent to you guys one to go! :P cheers