Search results

Ok thanks mate, yes i can get the MCA's made with the tabs. So all e1-3 front swaybar are all the same size and length? Jamie, yeh that would be good, so you don't have tabs on your struts? One thing to note, is that if running more caster and factory offset, on full lock your wheel could hit...

Ive been using the pS1000 for about 2 years now and all is going well, of course as you know ECUs are only as good as the tuner. Getting the cold start right was a little challenge but we got there in the end. Its been great with data logging too, it outputs via CAN to an AIM data logger! As...

ok folks, i need some advice on which way to go for the front swaybar setup on my E1. I have u-beaut Racefab E1 front lower arms and custom MCA suspension coming, so the way i see it i have these options: 1. Weld swaybar mount to front lower arms as per standard setup. 2. Weld swaybar mount to...

Here you go: MC 112A - Front MC 235 - Rear fronts include the seals. You can also just call CBC with part numbers already quoted in this thread.

For those interested, i only ended up paying $120 for the front bearings, the brand is Koyo. The CBC sales dude was very helpful and explained how CBC go about their bearings. CBC also sell the Chinese made bearings for a lot cheaper, but they have had a few instances where they have failed. He...

Autopro sold the fronts for $68 with seals, but only sold rear as full hub asembly which were $150 each. Autobarn had the fronts for $38 with seals and rear same price also. Mitsi was $500 all 4 bearings. When i asked the guy at Autopro on "WTF is going on with prices of bearings", he said...

yep they're not cheap I agree, but after some calling around, apparently CBC sell the better quality of bearings. You get what you pay for in this case (well.., i hope so).

I called CBC, price as follows: Front: part number MB303865 $181.84 per bearing includes inner and outer seals Rear: part number MB663547 $66.86 per bearing and does NOT include seals. Anyone know if the rear bearings have seals?

sweet thanks for the info!

Hi all, I'm doing a 5 stud conversion on my EVO 1 and need to replace front and rear wheel bearings. I'm using EVO 4 rear hubs and FTO front hubs, can I assume bearing part number MB303865 will fit? i believe that part number is front only, so anyone know what part number for the rear? Also...

thought i'd contribute with some of my mixes, i mix deep house and deeper drum and bass. Have been a finalist in various DJ comps and played interstate. Check em out here: https://soundcloud.com/briller If you're into drum and bass you can't go past www.bassdrive.com!

well i think they look ok, and they still look mint on my e1, you've seen my car Jamo!

i'll be removing my heater core from my e1 very soon, not sure if its the same as RVR though...

you can also get proton roof strips new from a dealer which are much cheaper than mitsubishi

apologies, proly helps to actually read the thread...

you could get new lower control arms made up and have them moved forward which would give you more caster adjustment, but thats a bit hardcore for a street setup! oh and i assume you mean the gap between tyre and front bar

I'm interested to see where this goes also, i'm currently looking at albins or something from Modena. Not sure how stock internals would go in an enduro setup though... Can anyone confirm if Modena are making gearsets for early evos?

i have e1 factory piping if you're still looking.

I'll have my hotbits coilovers for sale soon if you're still looking...

I have an ECU for sale with meek chip, i ran evo 8 injectors and 18 psi.