Search results

4GTuner

Help Support 4GTuner:

  1. A

    How to remove front drive shafts?

    Use a fairly large screwdriver, I found an 8mm worked well.
  2. A

    Help Time Belt !!!

    Not sure if you know about the instructions on this page http://vfaq.com/mods/timingbelt-1G.html That page may be of some help.
  3. A

    time over distance speed cameras

    I think this is how they will work. Neither camera measures your instantaneous speed, like the normal road side radar speed cameras do. The time distance cameras work by the 1st camera taking a photo of every number plate that goes past it, and recording the time of the photo and using a...
  4. A

    VALVE STEAM SEALS!!!!!!!!!!!!!!!!!!!

    If the reason you got these quotes is because the engine is blowing smoke, then it may not be due to the stem seals, it could be the rings and/or worn valve guides. If the $500 quote bloke says the stem seals will fix the smoke problem then you could let him do it.
  5. A

    3-4th syncros HELP please

    MD730086 are not paper lined.
  6. A

    Blown turbo???

    If the motor is worn, you should do a compression, or even a leak down test, to see if the piston rings are bad. Most experienced people would have checked this before checking or replacing the turbo.
  7. A

    performance car yards

    There's a yard on Bell St. Preston, about 1km west of Albert st, they seem to have a lot of Skylines.
  8. A

    another headache with my car

    Check your waste gate arm is still connected to the waste gate spring/vacuum unit.
  9. A

    New Laws????

    Don't know about the power/weight limitations, but sort of on the subject of new laws in Vic. I know there is a new law which allows the cops to, on the spot, impound your car for a couple of days if any of your tyres break traction. You have to pay for the impound costs too. I don't like the...
  10. A

    click? clunk? crack? hard to explain..

    It's not likely they unscrewed themselves, it's more likely when you were tightening down the bolts, the wheel was slightly crooked on the hub and it felt like the bolts were fully tightened when they weren't.
  11. A

    GSS341/GSS341/GSS342 ? or bosch?

    GSS342 will fit, it has the electrical socket that matches the VR4 plug. You have to cut off the flare on the end of the stock fuel pipe, and use a 100mm long piece of fuel hose and a couple of hose clamps to connect the Walbro to the pipe. Because the GSS342 provides a lot more flow, it over...
  12. A

    Ethanol in petrol

    On the TV news last night the PM was saying they are going to force the oil companys to add ethanol to the petrol and they are going to prevent the oil companies from telling us if there is ethanol in the petrol. Any one know what affect ethanol will have on our GVR4s ? What does ethanol do to...
  13. A

    OSTRICH - GREAT Ecu Tuning Device

    How do you mount the ostrich box ? Do you have to leave the lid off the ECU and fix the Ostrich box to the body or trim ? What kind of user interface does the Ostrich have on the PC ? Does it just enable you to run a selected pre-modified binary ? Or do they have some kind of ECU specific GUI...
  14. A

    Won't start!

    Probably not necessary, but if it's a normal battery don't forget to check the water levels in each cell. If one or more are low, the batterys life may have been reduced.
  15. A

    WTB New 2nd gear and new 1-2 gear Hub/Sleeve

    It's for a VR4. Any one know where they can be had, and how much ?
  16. A

    Jack Monkhouse.....

    I saw some coverage. The funniest bit was when they showed his dad using a baby sledge to knock a hub or some thing off one of the axles, and then mentioned that his dad is a surgeon. :shock: Now that's parental commitment.
  17. A

    injector info / fuel pump info

    I was intending 255HP to be read as 255 High Pressure, this is the way I've often seen the Walbro pumps referred to before. Their 255 pump comes in two versions, a standard and HP. I believe the only difference is in the pressure setting on the outlet valve on the Walbro pump. This means the...
  18. A

    injector info / fuel pump info

    I expect the cheapest fuel pump solution would be two Walbro 255HP pumps.
  19. A

    Someone shoot me, im surrounded by amateurs!

    A friend took his WRX to Amberley a few years back to get some kind of piggyback device installed. I didn't query him before he went about how they were going to integrate it into the wiring. When I next saw my friend he told me Amberley had just chopped his wiring loom. If I was doing...
Back
Top