Search results

*Current draw. *In series with the battery.

If you have a volt meter, do a parasitic draw test. There are heaps of videos on YouTube on the procedure, but you basically monitor than amperage across the battery and keep pulling fuses until it goes to 0. Then you know which circuit you are looking at. Good luck.

Ive got some off an evo 1-2 in Brisse that I could be persuaded to part with @EvoOne. Let me know if you're keen.

Hi guys, I have a 1 RS sitting here doing nothing and I am considering transferring everything into a registerable shell so I can actually get some use out of it. As a result, I am chasing a bare shell from a CC GSR (4wd) or even a rough car with a blown motor. Let me know if you have (or...

The bolt was stripped, so I tapped the nut up in the body and got some new bolts, and its still doing it... Maybe the nut is too far gone?

Hi guys, In the process of changing the evo 1 over to 5 stud, I went to replace the front lower control arms and it seems that the 2 bolts that go through the front lower control arm, into the subframe and then through to the body now don't tighten properly. They start to tighten up and pull...

Hey mate. Do you have the little spacers between the head and the fuel rail? Cheers

Hi guys, As stated in the title, I am after a the hose from the rack to the pump. Mine is leaking like a sieve. The car is a 1RS and Im in Brisse. If anyone has one please let me know. Cheers

They wont bolt straight onto 4 stud hubs, but you can buy adaptors that will work. I had a set bolted to Evo 1 4 stud hubs and just had the rotors re-drilled to 4 stud. These brakes are off an Evo 6.

c'mon guys, these things are in great shape! Price Drop - $1,000

Hey Guys, Selling another set of brembo's but these ones are in great shape. There still red, not pink. and they havent been painted. Bought these years ago for another project but never got around to fitting them. 4 calipers (with standard looking pads), and 4 rotors. $1200 - pickup in...

FOUND!!! Delete please ;)

at buyers expense. yep. ;)

and again.

more of the clutch bits...

Hi guys Im clearing the garage out: First: i have got a set of makinen 6.5 wheels, that are in desperate need of a acid bath and some new paint but should come up nicely. i was going to use them as track wheels but no longer have a need for them - $500 Second: is a clutch and flywheel removed...

SOLD!! Thanks guys!

Hi guys, my evo 5 is almost here and i have 1 Greddy a-pillar holder that holds 2 gauges. ive alrready got a 60mm white faced boost gauge, and im after a second. preferably oil pressure, but maybe temp. let me know. Cheers

They were bolted to a set of evo 1 hubs i had lying around.. have since sold them so i cant post pics, but no modification was required.

c'mon guys... need these gone!