Search results

yeah that's what I figured. were can I get after market new?

$200 plus freight

ok so will go with the evo cylinder hopefully should bolt up. anybody got one? reputable wreckers in Sydney? rang a few,just want to rip you off and sell any old shit.

so I want to put a 1-1/16" / 27mm brake master cylinder on the VR4 rally car to try and get a firmer peddle with less travel. In the US seems a common thing they do, using a variety of cylinders form other cars/makes. what do we have here that will bolt on? anybody done this? results? cheers Rob

yeah did that, jumped out. have a spare RS box that was of "unknown" condition just pulled that apart and checked reverse idler lever against the original one, yep its bent! spare box looked like its just had a rebuild! still had assembly lube on the gears/bearings etc reassembled it and its...

Hi all I run a VR4 RS gravel rally car and after an "excursion" into the scenery (hit a stump on the rh front ,bent control arm, tie rod etc) the gearbox that was perfect before now jumps out of reverse with the slightest load. checked all cables, bushs linkages etc all good feels to engage...

I bought one of these after contacting the seller who wasn't sure if viscous or plate type LSD. they said what was in picture was the item for sale. and it was just that, a plate type evo 111 centre in very good condition put it in my VR4 works perfectly. bargain!! Robert

Hi Pete Im after a pair of standard (non ABS) hubs. going to get Mike Dale (blackvr4) to machine them with the adjustable screw in retainer. have you got a good pair of hubs lying around? never had a problem with pad knock off till last event, got to pump the pedal nearly every time now...

PMed

what are the chances of these fitting under a standard 15" VR4 wheel??? (rally car, gotta run 15s)

keen on the GSR rear diff and axles can you email me a pic (want to be sure axles are the ones im after) [email protected]

pm sent

do you have the 4 bolt axles and cups??

Ive got a set of ohlins from an evo 6 (i think) that come with spacer plates to fit VR4, have to drill the stubs to evo size to make them fit, had them in my VR4 rally car for 1 event but were a bit to low for Gravel rallys. were more for track work. PM me if your interested.

got it sorted refund has been deposited. seems the guy that supplied them to the guy that sold them to me is a bit of a %^$# wit. they suit evo 456 and will be back on ebay as such. be a good buy for somebody, in as new nick. so whos got a set of 260s to suit a VR4???? thanks for the input...

dude i bought them of will give me a refund if i can prove to him there the wrong ones and i dont want to sell them on if i cant guarantee what they fit.

the cam angle sensor slot is wrong in relation to the cam gear pin and lobe centres. the lobes on the cams are almost 180 degrees different when you line up the pins. if you redrilled the pin hole in the cam and machined the cam angle slot in a different spot they "might" work. i think i have...

bought a set of 260 degree Tomei camshafts of ebay supposed to fit evo123 VR4 RVR (1st gen 4g63) went to install them, not even close. Mechanic mate had a look reckons there 2nd gen 4g63 evo 4 to 7 the numbers on them are 2602X and 4 2607N can anybody confirm that these numbers are 2nd gen...

PM sent

nope was a 4g63