Search results

Hi edymadman7 To get part numbers I usually go to https://partsouq.com/en/catalog/genuine/vehicle?c=Mitsubishi&ssd=vehid%403118%7E_%40OWnzgz-bKz8%21&vid=3118 and find the oem there and then compare partsouq prices with Amayama , evilbay and everyone else. Hope this helps, a bit late though...

Sorry for not replying earlier penngwyne, The bills get higher, rates, water, elect ect and only a $1 pay rise in the last 8 years. I keep looking but there simply isn't anything better out there (work wise). So, unfortunately, I am only just trying to keep this car, (which is my daily ride)...

lent on my dip stick not long after I got the car and it snapped with no pressure. I got one from a hyundia lantra. was a little different in length but I just re-notched it. However,I don't think that the one I broke was an original anyways. gonna get one from partsouq

well, I was right about the crank angle sensor. I had the engine on a little trolley jack and had it sitting there for 2 weeks while I got some parts sent from partsouq. I didn't realize that the jack had lost some pressure and lowered the engine. that was the main reason for the problems with...

I got it on with some very minor damage. very hard to get it around the waterpump housing, aircon compressor and the alt. can I use a voltmeter on this OBD outlet to read an error code? if so, does anyone know which pins?

I'm finally doing the timing belt. Have it on and all seems to be right,, all the marks line up and I have turned the crank 12 complete rotations with no problems. I have replaced both A and B belts , all pulleys, hydraulic tensioner, and the crank shaft sensor. main reason I finally got around...

Huh? I didn't have nightmares.. I just had a dream about doing the job and remebered that in the dream I was paranoid about everything I did,, but then I started it up and drove it home,, no problems.. ended up being a happy dreamm,,, ummm no ,, not that kind of happy dream ,, lol So at this...

Thanks penngwyne for the tip on the tensioner and the video. I've seen another vid on youtube explaining how to use gravity to the right timing position on the balance shaft. I've watched so many vids now, I think I could do this job in my sleep lol,,, And I know that one night I definitely...

Hi Penngwyne. I've got the 'timing kit' (2 belts, pullies, seals ect) the 'specialist' tools, but just had 2 of the worst months , financially, that I've had for years. I just can't afford the tensioner,, but hope to buy one for my Christmas present, lol. Our diesel mechanic at work wants to...

Hey, I just paid for the timing/balance kit, at meek,,, and tried to buy the tensioner but it is unavailable Quick question, I got the timing shit on the way, I just want the tensioner! Any advice?

Sorry about the late reply Quknez. I just let it idle over bout half an hour and they were still noisy as, so I jumped in and took it up to the pub and back. By the time i got back, they were fine. maybe by taking it for a run I built up the oil pressure? not sure, but it worked.

after watching these 2 vids I feel pretty confident now,, https://www.youtube.com/watch?v=lRwecE8OOLU https://www.youtube.com/watch?v=2q5xaUm0Kto Those tools from Sealey arrived today and you were right penngwyne, the other bigger pin is to retain the oil pump. I will rotate the engine a...

Did mine a month ago after watching that vid with no problems. I used 2 screw drivers, One to lift and one to push. Used a cloth to stop them from flying. One thing I learnt quick is that there are 3 large oil 'holes' leading to the sump,, use a few cloths to block them. Also be aware of where...

Well, I've spent hour upon hour searching the net for this part and that,, but had I spent a few minutes searching 4gtuner, I woulda found this https://partsouq.com/en/catalog/mitsubishi/category?catalog=US&model=N23WG&code=A038D517A&classification=SRXF duh.. lol.. better late than never

Hi , guys. Got the lifters this week from the USA, and put them in yesterday. Everything went fine with the exception of the valve cover not wanting to budge, had to lever it of with a pinch bar,. I'm a bit worried by the amount of black 'crud' I found in the head, so I have decided that at a...

Ok, I gave it ago but it just reset itself to nothing the next time i started it... I really just don't give a shit weather it works or not, but its a piece space that takes up room in the cab so it may as well work! WTF???

Thanks again guys. Your help is appreciated. I've ordered those lifters, so that's another job done, Still got the lower control arm bushes, shocks and maybe top strut mounts to do. Gonna use the tax return for the timing belts A/B plus the seals, bearings ect. Think i found the problem with the...

OK. I think I might be getting a little confused here?!! The link that deepsouth provided is for valve guides? And you guys are telling me that it is actually the lifters? that is the problem. ?? Or am I drinking to many Coopers Pale?

Hi guys, Thanks for the input. I am gonna go with the lifter idea, and will replace them. I would rather go with quality parts rather than cheeper. So, what are a good brand for these? Also, there is a guy on the net who has a few videos up on youtube http://www.youtube.com/watch?v=M-s1r1JlKy8...

Hi guys. I've got a few things done to it now and I'm up to the hard stuff. When I first looked at this car and when it was first started, I immediately heard a "valve" noise. A 'mechanic' mate of mine who had come across this car and contacted me and urged me to look at it, told me that it was...