4g63

I need a permanent solution to the common roof rust, something to fix it permanently not temporarily. Hopefully someone had done so or knows how? I have a spare roof (drilled the spot welds out of a spare car and took it off) but i would prefer to fix the roof in the car as that would mean i...

Hey guys, Will continue to update thread with items as i go. Mild Steel T3 Ceramic Coated Exhaust manifold EVO 123 VR4 - $100 Bought from NZ, Not the cheap stainless manifolds that crack! Heat coated from thermal edge coating. http://www.hybridperformance.co.nz/hp/product.php?id_product=16...

For sale 1997 Mitsubishi RVR Hypergear $4500 Brisbane Southside 140km Manual Td05 20g Apexi AVCR Aem wideband Hks turbo timer Evo 7 ecu 700cc injectors Kelford cams, hks cam gears, hks springs and retainers Tuned on e85 (199kw@w) Evo 7 front suspension with new low king springs, rears are...

Guys, Anyone got a spare block they want to donate to me? Need to practice my cross-hatching skills with a flex hone. Just need any cast block really, with bore size 83-89mm... cheers alex

100mm 2.4l crank forsale In good condition. 7 Bolt Balanced will require a linish before use $100 Hks twin plate clutch needs discs comes with throwout bearing flywheel 7 bolt $100 located Vic can send at buyers cost

So clean out time..... Complete 4g63 engine 200k from RVR turbo has slight shaft play but ran okay before being removed $1500. Standard Flywheel, Exceedy race pressure plate, 5 Puck Ceramic sprung centre $400 (from EVO3) Reconditioned master and braided line $40 (CB lancer but should reach for...

Hey guys! so my gearbox has pretty much shat itself and now grinds when ever I change gears, thinking of reconditioning the gearbox and just pretty much getting new selector sleeves, synchro and hub assemblys. Or theres the second option which is buy my mates second hand gearbox which is from an...

Hey guys! I have a 1995 RVR Sportgear and just bought it recently. I'm having problems with the gearbox. It grinds when I put it in reverse unless i open up the synchros by putting it in 1st then 2nd then back to 1st then put it in reverse and then there is no grinding. But now its starting to...

Just doing a sanity check here, When running a 100mm crank in a 4g63, only standard length rods (150mm) can be used as the pistons will be too short with 156mm rods. Does this sound correct, or are there 'off-the-shelf' pistons to suit 100mm crank & 156mm rod in a 4g63? To my understanding...

WTB 264 Cams for 4G63 Evo 3

Correct size (shorter) pistons must be ordered when going long rod setup (156mm rods) on the 4g63. The good news is higher rod/stroke ratio = good. However I want to know what are the adverse effects of running shorter pistons? From my understanding in general going shorter piston means...

Evo 1-3/RVR/VR4 - 4G63 Fully Built Bottom End My motor is sitting in the way at my friend’s workshop so it’s got to go. This motor has not been run, is BRAND NEW and is the same spec as used in my car making 647hp atw. Just BYO head. Price: $4500 if sold within 2 weeks - Payment Pending Specs...

Wrecking evo 5 shell + more available Parting out whole car + shell for sale Brakes sold Interior _seats sold 5 stud sold Has new bc coil overs suit 4/5/6/6.5 evo 5 4g63 130xxx ks on motor can be seen running before removal, runs perfect pretty stock only has a intake on it and exhaust...

*updated 11/01/15 As i mentioned in my build thread I'm parting out the excel and whatever other parts i have around the place as well, i have put together some package deals on some items that go together i preffer to try and sell them as a package deal first, and if they don't go within a...

As above just checking to see if any one has one sitting about? I have one on order so can replace it but it may not arrive in the time frame I need it too? cheers

Hi guys and gals, I need to get rid of a few things so i can have some space back in my garage. Would prefer local pickup (Brisbane), can post smaller items. For large items if you can organize a courier to pick up I'm willing to post. Can contact via PM or SMS (i generally have **** reception)...

I finished up my dump pipe today. I wrapped it, it took 50ft of wrap to cover it! Regards the design, I spoke to someone about dump pipe and external wastegate setups, he pointed me towards having at least 600mm/2ft uninterrupted dump off the turbo before merging. I ended up with 800mm before...

Hello folks, i have an oil sump for sale from my E1, asking $100, located in Canberra, contact me on 0431 065777, pics attached.

I own a 96' Evo IV GSR and I've heard that some parts off of a Eagle talon TSI of the same year will fit my car. Does anyone know anything about this? Im not so much looking for engine components as I am looking for things such as brakes and other small things. In particular I'm looking for...

Just landed a black EVO 4 half cut from Japan. We dont buy damaged cars from Japan unlike some other importers. This EVO 4 has done a genuine 108,100 km. Engine has been compression tested on the 28/10/13 with 180psi on 3 cylinders and just over 170psi on the the other (got pics). The engine was...