gsr

Hey all. So I'm in the middle of converting my Proton Jumbuck to a 4g93t. I have pulled the 4g15p, swapped the box over to the new block and dropped her into the buck. Wiring loom is in and I'm hitting a few bumps along the way that I'm hoping someone can help me with. There will be a few...

For sale is my GSR/EVO123 front crossmember.. I bought it for my GSR lancer but I have since sold the car and have no use for the front cross member. It is in great condition and is straight. Very rare to find as there are none that I could find in Australia apart from this one. That was 4...

I need a permanent solution to the common roof rust, something to fix it permanently not temporarily. Hopefully someone had done so or knows how? I have a spare roof (drilled the spot welds out of a spare car and took it off) but i would prefer to fix the roof in the car as that would mean i...

[b]Item: forged 6 bolt engines [b]Item Condition: New/yet to be run/newly assembled [b]Price: 1600 for short motor, all prices can be negotiable within reason [b]Extra Info:see ad [b]Location: Brisbane [b]Preferred Contact Method: pm Hi all Due to the withdrawal of the buyer from completing...

6boost mani, garrett GT2860RS turbo, dump pipe and actuator to suit, oil drain, water line, 3” s/s donut and wide band sensor. All new and unused. Mock fitted to sort lines and piping out, but only got ½ way thro before getting side tracked and cars up for sale now. $1000 ono Wa 6153

I'm in need of some help, so last weekend i swapped over my gearbox since the old one was crunching, i was told the gearbox i installed was mint, after installing a new clutch and putting it back together with new fluid and correct grade of oil it wouldn't select first unless i shifted into...

HI All I am just seeing if there is any interest out there for a set of EVO 3 plates.. I haven't even attached them to a car so they are in AS NEW condition. See photo for how they look. There is nothing left for any EVO 3 combinations. I have been manufacturing Personalised Plates for over 14...

Hi All, I've purchased a Galant GSR for the gearbox and auto components. I'll be wrecking the other parts if anybody is interested. Let me know if you need anything. Located in VIC. S.E suburbs. Not available: - Auto - Shifter mechanism - Cluster

Evo 1/2/3 parts Evo 1 skirts $100 Evo 1 rear bar and reo $100 Evo rear lights $50 Evo headlights & clear indicators $100 Engine/box cross member $35 Evo 4/5 oil cooler $75 Evo 3 dump $70 3 race harnesses in date $40 Walbro 255lph inline pump $75 Coilpacks & igniters $75 Evo 2 bare head $200...

PRICE DROP #3 $10000 back on the market Regreatable sale of my road⁄track project, It started life as a Std Aussie Lancer GSR 1.8ltr Turbo 4WD. It is far from standard now as most parts have been upgraded and replaced by bigger better goodies. It isn't the prettiest kid on the block but it...

So I've been having a proper look and tabulating which pins I'll need to change on my GSR Plugs so they match up to the correct ones on the Evo VI ECU. I've ordered a 12 pin plug from Spoolinup for the couple of wires that will need to go to pins located on there (GSR harness only has three...

FS: Evo 1/2/3/GSR 5 Stud Conversion. -5 stud front and rear hubs -Evo 3 calipers -QFM A1RM pads front and rear -Goodridge black braided brake lines -Evo 4 slotted front discs -FTO slotted rear discs These parts have done 3-4 laps of QR at Powercruise and have not been used since...

selling full 5 stud upgrade includes: brembo front and rear calipers near new brembo pads near new front discs no rear discs included evo 5 alloy lca,hubs,uprights evo 5 rear knuckles,hub,handbrake assembly evo 5 tie rod ends swaybar links rear aren't straight bolt on, you need a custom...

Hey everyone I'm having real dramas with my wiring harness and I'm at my limit of knowledge if checked every forum I can find read pages and pages of posts I cannot get the warning light for abs to switch off last weekend I traced all the wiring and it's fine and I've also swapped over both the...

GSR gearbox, disassembled, had slightly noisy 1st gear bearing otherwise great, re-assemble or use for parts - $150 SOLD Complete 4G93T GSR engine, in parts. No damage. Block has been bored 20 thou - $150 GSR rod and piston set - $40 GSR rocker cover -$20 SOLD Stock TD04L GSR turbo, excellent...

Hey guys! I have a W5M33 NRBE gearbox in my gsr, wondering if i can replace it with a W5M33 NRWE gearbox? i know nrbe has no lsd and nrwe has viscous lsd.. needing to replace my gearbox as synchros are gone. Thanks!

Can anyone tell me the part number for a 1.5mm head gasket to fit a 1996 cm5a gsr? Thank you

SOLD

Lancer gsr e3 converted 1996 rolling shell with 11 months rego left on it. Selling due to engine blowing up and moving onto another car Body is straight no rust at all Comes rolling, factory sunroof, e3 guards, boot/wing, skirts, whiteline rear swaybar, evo 3 brakes, most suspension bolts...

Lancer gsr e3 converted 1996 rolling shell with 11 months rego left on it. Selling due to engine blowing up and moving onto another car Body is straight no rust at all Comes rolling, factory sunroof, e3 guards, boot/wing, skirts, whiteline rear swaybar, evo 3 brakes, most suspension bolts...