turbo

Hey guys, Got a 1997 RVR SSG (I think) with an NA 4g63 and 4spd auto box. What I'm aiming to do is a factory turbo conversion to it and run it on wastegate pressure or fixed at 0.8 bar, haven't decided yet. Anyway, I just wanted to confirm if I have all the right bits to make it work and if...

Hi! I have this project of mine and I need some help with it. I have issues with fuel cut while accelerating. Specs: -Fully rebuild 4g92 SOCH -Swichzer EC-01 turbocharger -Original ECU -240cc/min Fuel injector from 4g93 -85x35x18cm intercooler with 2.5" pipes -Screwable fuel pressure regulator...

hey guys thought I'd put up a few picks of my updated build as the last high compression turbo build finally let go on the old setup I made (can see the old build on my page ) I did everything from scratch by my self now since then the motor of coarse only handled abit over a year regular...

Hey guys hoping some one can direct me in the right way ? I have a proton satria gti and have turbod about a year ago my build is on the forum .now I'm up to upgrading my fuel pump because then I know I have one that I know of will the walbro gss341 fit plug and play? I bought one of these for...

So clean out time..... Complete 4g63 engine 200k from RVR turbo has slight shaft play but ran okay before being removed $1500. Standard Flywheel, Exceedy race pressure plate, 5 Puck Ceramic sprung centre $400 (from EVO3) Reconditioned master and braided line $40 (CB lancer but should reach for...

Hi I'm looking for any suggestions or opinions of mechanics in Brisbane, with knowledge and experience working on RVRs and the 4G63T Evo III motor and driveline. Thanks.

PRICE DROP #3 $10000 back on the market Regreatable sale of my road⁄track project, It started life as a Std Aussie Lancer GSR 1.8ltr Turbo 4WD. It is far from standard now as most parts have been upgraded and replaced by bigger better goodies. It isn't the prettiest kid on the block but it...

Hey guys! so my gearbox has pretty much shat itself and now grinds when ever I change gears, thinking of reconditioning the gearbox and just pretty much getting new selector sleeves, synchro and hub assemblys. Or theres the second option which is buy my mates second hand gearbox which is from an...

m

FS: Evo 2/3 rear seats. Needs a vacuum to get all the dust off them. Decent condition, only defect is the stitching coming off on passanger's side (about 5cm length). Can do with a stitch-up if you're fussy or use it as is. $50 Pickup Melbourne North East suburbs. Cheers Alex 0467 551 445

*updated 11/01/15 As i mentioned in my build thread I'm parting out the excel and whatever other parts i have around the place as well, i have put together some package deals on some items that go together i preffer to try and sell them as a package deal first, and if they don't go within a...

After something along the lines of a TD03 or TD04. Can be stuffed on the turbine side not fussed. Thanks

So after much dicking around, i finally got off my ass and got my engine out today. I've had a cracked piston for awhile and my gearbox has been crunching second. I'm currently tossing around a few idea's for different turbo's and yes I've read again and again on this forums and others but...

Hey all. New here, so you'll have to excuse me if nothing makes sense. Lol. Here goes... I have an 1996 mitsubishi lancer gsr turbo. 1800 dohc 4G93. CM5A. Lately it has been idling weird like as there was a air leak somewhere in it, but I have searched through all the air hoses and lines...

I have my CB GSR which had a VR4 conversion before the engine blew. Was an ex Philcom Rally Car Has plenty of parts including: -Whiteline adjustable rear sway bar -Front and rear strut braces CB -Walbro GSS 342 in tank Fuel Pump - good used condition $60 -Rear King springs $80 -Twin pot EVO-VR4...

Ive decided to sell the wifes car... We bought the car in march 2012 as we needed a bigger family car and it has not missed a beat since we first owned it. It is extremely reliable and a head turner at the same time...with lots of people asking "what is that!" Only selling due to finding...

Ive got the gt pumps td05 20g on my vr4,supporting mods is 2.5 inch piping 3 inch decated exhaust,70mm throttle body aspec manifold 560cc injectors 272 bc cams gt pumps cast exhaust manifold too,eprom and osterich for ecu management,and the usual forged internals . Now the issue is ive set boost...

Hey fellas, just going through the shed as I'm coming close to finishing a project and looking at what I no longer need. All items are located in Adelaide, postage is not included and is extra. The list is included below and I'll try update it when/if i find more stuff :thumbsup: Open to offers...

ITEMS: 3 Inch Custom Stainless/Aluminum Turbo Intake Pipe with K&N Pod Filter, T28/T25 to Factory Exhaust Manifold flange Adapter., 3 Inch Dump Pipe to suite T25/T28, ITEM CONDITION: Used however excellent condition. EXTRA INFO AND PRICE Genuine Garrett GT2860RS Disco Potato, .63 exhaust...

For sale, my 2003 Saab 9-3 Arc Sports Sedan. Very low km's (73,000), it's always garaged and maintainence is done by Saab Service. The fair is in very good condition and is seldom used. I would love to keep it as a commuter as it is so nice to drive, but I have a work vehicle, motorcycle and a...