CraigGSR
Member
Item: 1994 GSR Lancer highly modified 2 Litre
Location: Orchard Hills Sydney
Item Condition: Not registered or running, nearing end of project.
Reason for selling: New family and the money is needed else where...*tears*
Price: 10,500 firm. I am selling as a full package, and i'm not really willing to
separate, however if anyone is chasing any of the below PM me...
Payment Method: Pickup - Cash, for an added cost I can deliver to Sydney / Newcastle areas.
Extra Info: Here are the mods and details:
1. Ancerlite grey Aus spec GSR Lancer.
2. 2 Litre VR4 forged engine. Engine is bored to 40 thou, and has been chemically crack tested. 2nd block is included in the deal...
3. Arias forged 40thou pistons fitted. These were crack tested, weighed and balanced. Supplied by meek.
4. VR4 conrods. Crack tested, weighed and balanced. Fitted to engine.
5. 2 x VR4 Cranks, both are crack tested and balanced. 1 is fitted to the engine. Also fitted is APC Rod bolts. Supplied by meek.
6. ACL Race bearings fitted.
7. 264/272 Camtech cams new in box. Supplied by meek.
8. 1 x VR4 EVO head and 1 x VR4 ported head to suit 272 cams.
9. 1 x commetic head gasket. New in container. Supplied by meek.
10. 1 x XTR 450 HP roller bearing turbo, fully reconditioned and is in brand new condition. Never fitted after recon.
11. Custom exhaust manifold to suit the XTR turbo.
12. Genuine walbro high flow fuel pump fitted. Supplied by meek.
13. Heavy duty valve springs, new in box. Supplied by meek.
14. Heavy duty exedy clutch, brand new in box, never fitted. Supplied by meek.
15. Heavy duty pressure plate and thrust bearing brand new in box, never used. Supplied by meek.
16. 1 x EVO ECI Multi intake manifold and elec distributer.
17. 1 x Aus VR4 Cyclone intake manifold and elec distributer.
18. Autronic SMC computer with auto tune and elec boost control. Twin bosch elec ignition modules. All fitted by turbo technics and tuned to 18psi. Currently set up for running in @ 7psi.
19. Magnacor 8mm leads.
20. Full engine gasket kit. Spllied by Meek.
21. Full engine mount EVO rubber kit fitted. Supplied by meek.
22. 3 inch cat back Apexi exhaust.
23. Full EVO 3 body kit and Alloy EVO 3 bonnet. Original bonnet is also included.
24. 1 x Reconditioned GSR Gearbox and 1 x original gearbox, but has repaired bell housing. (damaged in workshop).
25. Gates racing timing belt, never fitted new in box. Supplied by meek.
26. Engine balance shaft removal kit fitted to block.
27. 17 inch Zenetti Chrome rims with 95% Ziex tyres.
28. Custom checker plate interior.
29. Alpine CVA-1000 indash monitor and custom crossfire stereo installation. Has boxed and rear parcel shelf ported 12 inch sub woofer. Very clear and loud system.
30. Clear upper timing belt cover.
31. Large Front mount intercooler with custom 2.5 inch mild steel I/C plumbing.
32. Polished 2.5 inch aluminum I/C plumbing kit, with all bends, silicon tubing and quality clamps to replace the mild steel kit. Requires welding though.
33. Front mount oil cooler.
34. Twin pot brakes (not fitted), painted in bright Mitsubishi high heat red.
35. Front EVO drive shafts fitted.
I have spent close to $50,000 on this car and it is killing me to sell it. But due to a new family and having another car, i have to get rid of my pride and joy for new room and money.
The engine, computer and turbo package alone cost over $15,000. I have receipts for all of the purchases. Majority of the parts ad brand new in its box and supplied by meek. All balancing was performed by teterin engineering $2000 + !!!. All tuning and elec work is done by turbo technics.
What is needed to finish the package is finish engine rebuild. (Crank dowels) Choose which head you want to use and shave it, fit the cams and heavy duty valve springs, and fit the new clutch and pressure plate, bolt it to the new gearbox and fit to the car. A new turbo to cat pipe and cat is required. Car is also not engineered atm. The car will require re painting due to slight crows feet on the roof and the bonnet is purple.
Please only serious buyers only. I dont want to part with any bits, i'd rather sell as one package. Will be a very reliable and powerful engine. No expense has been spared on the mechanical parts.
If you'd like more info or pics, please feel free to email me at [email protected] or call me on 0424854025.
Location: Orchard Hills Sydney
Item Condition: Not registered or running, nearing end of project.
Reason for selling: New family and the money is needed else where...*tears*
Price: 10,500 firm. I am selling as a full package, and i'm not really willing to
separate, however if anyone is chasing any of the below PM me...
Payment Method: Pickup - Cash, for an added cost I can deliver to Sydney / Newcastle areas.
Extra Info: Here are the mods and details:
1. Ancerlite grey Aus spec GSR Lancer.
2. 2 Litre VR4 forged engine. Engine is bored to 40 thou, and has been chemically crack tested. 2nd block is included in the deal...
3. Arias forged 40thou pistons fitted. These were crack tested, weighed and balanced. Supplied by meek.
4. VR4 conrods. Crack tested, weighed and balanced. Fitted to engine.
5. 2 x VR4 Cranks, both are crack tested and balanced. 1 is fitted to the engine. Also fitted is APC Rod bolts. Supplied by meek.
6. ACL Race bearings fitted.
7. 264/272 Camtech cams new in box. Supplied by meek.
8. 1 x VR4 EVO head and 1 x VR4 ported head to suit 272 cams.
9. 1 x commetic head gasket. New in container. Supplied by meek.
10. 1 x XTR 450 HP roller bearing turbo, fully reconditioned and is in brand new condition. Never fitted after recon.
11. Custom exhaust manifold to suit the XTR turbo.
12. Genuine walbro high flow fuel pump fitted. Supplied by meek.
13. Heavy duty valve springs, new in box. Supplied by meek.
14. Heavy duty exedy clutch, brand new in box, never fitted. Supplied by meek.
15. Heavy duty pressure plate and thrust bearing brand new in box, never used. Supplied by meek.
16. 1 x EVO ECI Multi intake manifold and elec distributer.
17. 1 x Aus VR4 Cyclone intake manifold and elec distributer.
18. Autronic SMC computer with auto tune and elec boost control. Twin bosch elec ignition modules. All fitted by turbo technics and tuned to 18psi. Currently set up for running in @ 7psi.
19. Magnacor 8mm leads.
20. Full engine gasket kit. Spllied by Meek.
21. Full engine mount EVO rubber kit fitted. Supplied by meek.
22. 3 inch cat back Apexi exhaust.
23. Full EVO 3 body kit and Alloy EVO 3 bonnet. Original bonnet is also included.
24. 1 x Reconditioned GSR Gearbox and 1 x original gearbox, but has repaired bell housing. (damaged in workshop).
25. Gates racing timing belt, never fitted new in box. Supplied by meek.
26. Engine balance shaft removal kit fitted to block.
27. 17 inch Zenetti Chrome rims with 95% Ziex tyres.
28. Custom checker plate interior.
29. Alpine CVA-1000 indash monitor and custom crossfire stereo installation. Has boxed and rear parcel shelf ported 12 inch sub woofer. Very clear and loud system.
30. Clear upper timing belt cover.
31. Large Front mount intercooler with custom 2.5 inch mild steel I/C plumbing.
32. Polished 2.5 inch aluminum I/C plumbing kit, with all bends, silicon tubing and quality clamps to replace the mild steel kit. Requires welding though.
33. Front mount oil cooler.
34. Twin pot brakes (not fitted), painted in bright Mitsubishi high heat red.
35. Front EVO drive shafts fitted.
I have spent close to $50,000 on this car and it is killing me to sell it. But due to a new family and having another car, i have to get rid of my pride and joy for new room and money.
The engine, computer and turbo package alone cost over $15,000. I have receipts for all of the purchases. Majority of the parts ad brand new in its box and supplied by meek. All balancing was performed by teterin engineering $2000 + !!!. All tuning and elec work is done by turbo technics.
What is needed to finish the package is finish engine rebuild. (Crank dowels) Choose which head you want to use and shave it, fit the cams and heavy duty valve springs, and fit the new clutch and pressure plate, bolt it to the new gearbox and fit to the car. A new turbo to cat pipe and cat is required. Car is also not engineered atm. The car will require re painting due to slight crows feet on the roof and the bonnet is purple.
Please only serious buyers only. I dont want to part with any bits, i'd rather sell as one package. Will be a very reliable and powerful engine. No expense has been spared on the mechanical parts.
If you'd like more info or pics, please feel free to email me at [email protected] or call me on 0424854025.
