1994 GSR lancer for sale 23EVO

[JETGSR]

PRICE REDUCED TO $ 15000

It has come to a stage where I'm needing to sell my car, this is a reluctant sale but it needs to go ..


For those that have seen and been a passenger in the car, they know it means business!

the list of bits and pieces and mods is very long I will try and list what I can remember (I am getting old) as to justify the price I'm asking.

Just to start!
I will not sell this car to a newbie (under 24) it will kill you or you will get it crushed. (and I don't want either)

LOCATED in Brisbane (southside)

EXTERIOR -
1994 GSR lancer - white sedan
tow bar
carbon fiber vinyl bonnet and graphics
front splitter is a bit average looking but suits the car, unfortunately has a bit of race damage but nothing bad
17 inch wheels with standard 205/40/17 maxxis rubber (street use)
17 inch wheels with Nitto NT01 semi slicks for track use (note all the wheels are the same design wheels)

INTERIOR -
OMP racing bucket - drivers only (you shouldn't be racing with 2 or more people in the car)
other seats are standard
Isotta flat bottom wheel
OMP 4 point harness (drivers only) have a crutch strap that isn't installed that comes with.
can sell with or with out stereo but it will not affect the price very much
alpine double din DVD touch screen head unit ($2000 in it day)
alpine mono block 1000w PDX 1.1000 ($1000)
alpine 4 channel amp 4x100 PDX 4.100w ($800)
JBL pro 6"midbase
focal K2 tweeters
Image dynamics ID Max 12
dyna mat and inter connect blar blar you know the stuff.

- gauges Auto meter Oil pressure guage
Tech edge LA1 wide band AFR
Gizmo shift light
K4 knock sensor (obsolete now running on E85)
Blitz SD ID2 boost controller - no not the pretty colour one the one before

SUSPENSION
BC ER coilovers
white line rear 18mm swaybar
rallyart top front strut brace

BRAKES
AP 330mm front rotors
AP 4 spot calipers
goodridge braided lines
AP / Frodo DS2500 race pads
RF650 brake fluid

MOTOR
4G63
stroked to 2.397 cc
JE pistons ceramic coated by HPC
Eagle rods
Balance shaft removed
Grouted block
modified oil squirters
std 4g64 steel crank
new OEM oil pump
HKS 5 layer head gasket
all ARP head/main/rod bolts
new bearings
cleaned up head ports (mild porting)
Kelford 272/264 cams
adjustable cam gears
Fluidamper harmonic balancer
Custom alloy plenum and 80mm throttle body
Cast stainless steel exhaust manifold with Ext wastegate porting (also has ferrels welded in for EGT probes)
Tial EX 38mm wastegate
Garret GT3082 B/B Turbo with hi-flowed front cover also surge slots machined in
3"dump pipe
3 inch exhaust
3 inch metal cat
3 inch muffler chrome for the ricers with a 5" dumpy on it not for the ricers
(the car idles at 92 DB - QLD limits are 88db MAX 4500rpm) Angriest mongrel you'll hear for a long time!
All block machining done by Jack Bros engineering
All balancing done by some bloke over the northside of Brisbane that his name escapes me (but he does group A engines and lambos)
There is probably heaps here I have missed.

ELECTRICAL
Haltech PS1000 ECU
TC4 thermo amp for 4 x EGT's
injectors - ID 2000's
coils LS1 coils x 4
Flex fuel sensor for ethanol - wired to haltech
MSI laptop for tuning - including the bodgy frame to hold it so can drive and tune (which is illegal BTW)
has launch control and antilag (not great for turbo BTW)
surge tank in rear right under guard
2 x bosch 044 fuel pumps
walbro lift pump
Edelbrock adjustable fuel reg
twin fuel to fuel rail
lots of speedflow

probably heaps more here too

Clutch plated rear LSD
Viscos front LSD
evo 5th gear and full preloaded gearbox
3.55 final diff ratios
what does all this mean?? 260 kph top speed

has full mod plates

previous tune on pump fuel made 275KWS ATW on 18psi
Currently running on E85 fulltime
has not yet been dyno tuned for E85 estimated power as it sits untuned 250KWS
Should be able to run 24PSI all day once tuned - potential power (not guaranteed) 300 plus plus

Asking Price $20000 <-- Price change $15000 (stereo and twin plate clutch removed from deal)

there is also a quartermaster twin plate clutch and flywheel to go with it (removed to isolate a past issue just never got put back in)

heaps of gearbox spare and bits and pieces

there will be no joyriders
first person to drive will probably buy

will upload pics later as have run out of time today!

direct all serious questions to [email protected]

 

[Turbo nutter]

See no one wants it so just remove your silly add and keep it! You know you'll kick youself later mate

 

[ENGINR]

You've probably scared alot of potential buyers off with your opening statements of business, death and crushing!

 

[Turbo nutter]

Just made me more keen to want to go for a drive, in the passenger seat of course! Maybe use it for the fastest mexican deliveries in the country?

 

[JETGSR]

I see too many young kids in high powered cars sitting on the side of the road with the front end stoved in because they were too immature to handle a dirty old commodore or better still dads new ford ute.

Can you imagine the phone call from the parent :fuuuuu:

but the car does mean Business

It's not a show car .... it's a race car

 

[MDK87]

Goodbye Stevo....

 

[ENGINR]

I see too many young kids in high powered cars sitting on the side of the road with the front end stoved in because they were too immature to handle a dirty old commodore or better still dads new ford ute.

Can you imagine the phone call from the parent :fuuuuu:

I'd tell them they should have raised their child to have more common sense and respect for their possessions and that they should feel personally responsible for any damage/death their offspring has caused - then thank them for the money and hang up :thumbsup: :thumbsup: .

Car looks great - I really like how the front end looks all business. Is it an EVO3 front bar?

 

[EVO-00X]

lol.. I got a good laugh at some of the comments.
A sad day indeed. Troy, this car is a weapon with a lot of the good gear in it already setup to make well over the conservative 300kw atw you mentioned!!! (I more inclined to add another 100kw on top of that!!)

 

[evopwr]

Wow some serious parts on this machine! Good luck with the sale mate.

 

[JETGSR]

It really is fun to drive. I will miss it
I know it seems like a lot of dollars but once you have driven it, you will understand.

I've put it around lakeside and it is truly fun I think I had a grin from ear to ear every lap. (if only those stupid Hyundai's weren't on there )

I've had a think and I'm negotiable on the price a little. (don't bother offering 10 K coz that won't happen

 

[JETGSR]

ENGINR : no that is a Aussie GSR bar with a heap of panels, splitter and canards attached

unfortunately not built for looks but for handling and ease of rebuilding should you find something in your way.

 

[JETGSR]

Bump - Price change!!!

 

[Rockabilly]

Troy used to have a - - - - - - -, but now it's cruising time hey ?
Cheers