hey guys. well it has come time part with my set up that took years to get right. the motor is still running in the car, for people to come look at it running. this set up has less the 2000km on it and has made 445kw atw on 26psi running E85.
i'd prefer to sell it as a package set up but will seperate if the price is right. i do have pics of the set up that ill try to put online.
Fuel system:
4x ID2000 injectors (2200cc)
2x 044 Bosch pumps
1x Carter low psi high volume in tank pre pump
-8 Braided fuel lines
has inline fuel filter, cant remember the brand
Motor
4G64 Race engine
Wiseco pistons
Argo Rods
billet custom cams
ferrier oversized valves
bronze valve guides
double valve springs
Arp head/ main studs
steel head gasket
race timing belt
balance shafts removed
block has been bored, honed, crack and pressure tested, sonic tested,decked
crank has been lininshed,deflashed and shotpeaned
all balanced with brand new gaskets, seals, bearings and clearances 100%
Turbo
GT35R 1.06 rear housing ceremic coated
3in ceremic coated dump pipe
44mm Tial wastegate
1 1/2in ceremic coated dump pipe
Manifolds
Hypertune custom inlet manifold with full CNC'd runners
Hypertune exhaust manifold with 1 1/2in runners ceremic coated
Hypertune 80mm billet throttlebody
Clutch
custom twin plate
this set up cost well over 20k
asking 14k
i'd prefer to sell it as a package set up but will seperate if the price is right. i do have pics of the set up that ill try to put online.
Fuel system:
4x ID2000 injectors (2200cc)
2x 044 Bosch pumps
1x Carter low psi high volume in tank pre pump
-8 Braided fuel lines
has inline fuel filter, cant remember the brand
Motor
4G64 Race engine
Wiseco pistons
Argo Rods
billet custom cams
ferrier oversized valves
bronze valve guides
double valve springs
Arp head/ main studs
steel head gasket
race timing belt
balance shafts removed
block has been bored, honed, crack and pressure tested, sonic tested,decked
crank has been lininshed,deflashed and shotpeaned
all balanced with brand new gaskets, seals, bearings and clearances 100%
Turbo
GT35R 1.06 rear housing ceremic coated
3in ceremic coated dump pipe
44mm Tial wastegate
1 1/2in ceremic coated dump pipe
Manifolds
Hypertune custom inlet manifold with full CNC'd runners
Hypertune exhaust manifold with 1 1/2in runners ceremic coated
Hypertune 80mm billet throttlebody
Clutch
custom twin plate
this set up cost well over 20k
asking 14k