4g63 into GSR, heater hoses and Oil breather

[slipn]

Hey all,

Well I finally got my GSR, I bought it with a 4g63 allready in it but there are a few little probs I wanna take off.

1st The car has no heater hoses, if anyone has any pics or ideas on putting them in to a GSR with a 4g63 that would be sweet!

2nd It has a oil catch can but at the moment it just breaths to atmo. Should it be connected to the inlet? or just back to the rocker cover?
once again any pics on this installation would help heaps!!

Thanks guys so far I have found this site to be totally helpfull and now that I have the GSR Im sure I will be a regular!!

 

[gsrevo3]

if your heater hoses are not connected make sure when they are to check that your heater core under the dash does not leak!!! cause this is a big job to fix :shock:

 

[slipn]

yeah true...

I dident think of that but i have no choice I want to get it totally Road worthy so i can drive around with the piece of mind knowing that the cops cant drill me on anything..

 

[slipn]

Come on....... I thought this was supposed to be TEAM 4G!!!

So no one here can help on a simple question?

 

[JETGSR]

do you just want the location of the hoses or what?

I can give you a pick no problems, or are you after the actual hoses?

I just transfered the hoses from the 1/2 cut to the new motor.

It wont mater which hose goes where ie: at the firewall, it's just the way the hoses are shaped fits around all the other bits.

attached are the locations of the hoses it's a bit hard to get a pick of the shapes but you should be able to work that out.


JETGSR