4g93 sohc 1.8l coupe interchangable parts

[mathew_colville]

I found a cheap coupe down the road and am contemplating buying it if i can get my moneys worth from it

can someone please tell me what parts i could use from a 1.8l sohc cc coupe on my lancer gsr 4g93t 1.8l
im mainly looking at engine mounts, radiator, air conditioner vents, dash surround

I found the topic on evocoupe, but now that the site is gone, its not much use to me (this is all i could get from the google page)
www.evocoupe.net/forum/viewtopic.php?f=2&t=3316
Apr 12, 2007 - 15 posts - ‎7 authors
Other 4G93 SOHC parts that would fit the 4G93T
Aircon,
power steering,
alternator,
starter motor,
throttle body,
engine mounts (if from a same ... from a same what?

anything else? or anything not true?

thanks
mat

 

[khubner1]

preety much everything

except
loom
injectors
dizy/cas
ign leads
oil pump

depending on the year and design (mitsu ran two different head designs in the cc run)
thermo/raditor hose fittings
the return fitting has an extra pipe plumbed into it for turbo (can be fed back in elsewhere if you get desperate)
themostat housing has a different fitting plubed into it for the heater core and turbo water feed.

block crank rods are all the same pistons are different flat/slightly domed instead of dished

mounts are all the same except upper gearbox (drivers side) if running an awd roll stops and pass side are the same. roll stops also the same as evo jumbuck proton of cc shape

everything else in the engine bay is mostly the same except for possibly some minor differnces in the body looms for power windows thermo fans etc

from there it's mostly different
hubs differnt PCD
shock differnt load springs

 

[mathew_colville]

Thanks for your reply