4g93t 2.0mm head gasket

[PROGSR]

Well i found something, not sure if it will be any use to you.
On this website: http://squirtparts.b...tal-gasket.html they have the head gasket and they have a part number for it however the same part number suits 1.8mm and 2.0mm. The part number is MD332820S. I couldn't find for myself any more information on the part number such as the bore size. I guess you could try contacting Mitsubishi in the morning and see if they can either tell you more info or see if one is in stock of the 2.0 mm variety.
Good luck.

MLS head gaskets from mitsubishi in JAPAN to suit CE model lancer

MD322823: CM5A 4G93T DOHC Metal Headgasket. (Factory piece in the CM5A GSR (EVO 4 shape), but fits​

earlier CD5A too) >>>> this is 0.8 mm thickness ...... I bought one and it wasnt thick enough due to deck height problem also.. about $80 from mitsi.

​

MD322820: 4G93 SOHC Metal Headgasket. (From CM5A shape Lancer) this is only 0.6 from memory.

 

[BRUSHED]

i was/ em running a jasma 1.8mm gasket in my GSR donk.. and ive had issue recently with oil leaking between the head and block, im using ARP studs aswell.. but maybe its something to do with the guys that i used to deck the head etc..

When we first ran the jasma 1.8mm on the engine a while back now we noticed that one of the pins holding the multi layers together was fouling on the block to head face so we had to drill it out, also the oil hole had to be drilled to get oil to the head

 

[PROGSR]

i was/ em running a jasma 1.8mm gasket in my GSR donk.. and ive had issue recently with oil leaking between the head and block, im using ARP studs aswell.. but maybe its something to do with the guys that i used to deck the head etc..

I think its got to do with too many shims in between the 2 outer gaskets, allowing the oil to seap through.
i originally bought one from STA parts in NZ, thickness 1.5 MLS and had the same issue.

 

[3zercrowd]

Did your issue get sorted Brushed?

 

[BRUSHED]

Yeah it's all sorted, I got the gasket but now still waiting for the pistons from Malaysia cos they are custom pistons, CP 40thou over

 

[3zercrowd]

LOL It never ends!