Dan Mayman
Well-Known Member
What oil filter reloction kit can I use or what is the thread on the oil filter so I can use a universal one is it 8an/10an etc thanks for your help guys
4g93t what oil filter relocation kit
- Thread starter Dan Mayman
- Start date
Help Support 4GTuner:
4piknup
master of none
Not -8 or -10.
Its metric.
Often written near thread on filter. Its not 3/4 but fairly close.
Its metric.
Often written near thread on filter. Its not 3/4 but fairly close.
khubner1
Moderator
same as evo on the thread i think.
Part Z411 Type Oil Filter Seam Diameter 69.50mm Overall Height 86.00mm Thread M20-x1.5-6H
so you want a reloc kit with an m20x1.5 thread make sure it's a quaility one and that you use FAT oil lines on it
people like the aero flow stuff i DON'T used it and it did somthing funny tore the inner lining out and came off.
put proper generic 500 psi hydraulic hose on it from the hose fittings supplier and never an issue.
Part Z411 Type Oil Filter Seam Diameter 69.50mm Overall Height 86.00mm Thread M20-x1.5-6H
so you want a reloc kit with an m20x1.5 thread make sure it's a quaility one and that you use FAT oil lines on it
people like the aero flow stuff i DON'T used it and it did somthing funny tore the inner lining out and came off.
put proper generic 500 psi hydraulic hose on it from the hose fittings supplier and never an issue.
Look at the permacool website. Can grab a kit for reasonably cheap and good USA made parts.
I got a kit including oil cooler and it came with plenty of thread options for all types of applications and filters.
Fit my 93t like it was made for it.
I got a kit including oil cooler and it came with plenty of thread options for all types of applications and filters.
Fit my 93t like it was made for it.
khubner1
Moderator
the one i bought at auto barn was usa made aswell had to modify the thread adaptor and then just recently the filter adaptor failed tearing the thread adaptor out from the housing
