BOOSTZILLA
Member
What is involved in doing a 5 stud conversion (5 x 114.3)
5 Stud Conversion?
- Thread starter BOOSTZILLA
- Start date
Help Support 4GTuner:
Front: Magna/Verada 5 stud front hubs and rotors, or FTO front hubs and rotors. Use existing EVO twin pot or VR4 calipers.
Rear:Nothing for the VR4 that you can use as a direct replacement.
See image below - Any of the front hubs and rotors shown in Blue circles will fit the VR4 or EVO I-III Lancers as they all share the same dimensions and thicknesses. Column 'F' is number of studs.
Unfortunately for VR4 owners, the rear discs are 265mm and there is no bolt on/press on replacement hub.
Pay no attention to the red circles, I had a discussion on the coupe forum about the FWD guys using FTO rears.
Rear:Nothing for the VR4 that you can use as a direct replacement.
See image below - Any of the front hubs and rotors shown in Blue circles will fit the VR4 or EVO I-III Lancers as they all share the same dimensions and thicknesses. Column 'F' is number of studs.
Unfortunately for VR4 owners, the rear discs are 265mm and there is no bolt on/press on replacement hub.
Pay no attention to the red circles, I had a discussion on the coupe forum about the FWD guys using FTO rears.
CLuTZ
Diamonds are forever....
I wonder how the RVR fronts and rears would go- I have one with complete EVO 3.909 driveline, and its 5x114.3 too
Similar threads
