adjustable fuel rail locally?

[boost_lover]

does anyone know where to find fuel rails that have screw ends for any size you desire?

basically an aftermarket rail. As cheap as possible. If i can buy it locally cheap i will. If not, ill buy overseas.

 

[DOUGMO]

powerflow in melbourne should have something

 

[VR-4Squid]

Cheapest option would surely be to get whatever fittings you require welded onto a stock fuel rail?

 

[bazeng]

As dougmo said.

 

[bazeng]

Welding also works but is not as pretty. On a serious note, The cast alloy used is quite crappy and makes welding difficult.

O youf want, I have a ceramic coated rail with-8 welded in and-6 fitting on the out end. Pin hole leak on the welded end.

 

[boost_lover]

Mine is already welded. Just looking to up grade. Thanks guys I'll check out

 

[boost_lover]

Wow power flow is a little pricey. Cheaper overseas. Anyone have experience with bmi? Also what would be the limit of the stock fuel rail?

 

[bazeng]

The limit is the size of the fittings on the end of them. The body itself is large enough for-10 fittings.

The only reason really to upgrade is to get the 14mm injectors onto there. Our 11mm stuff is harder o find and is more expensive.

 

[boost_lover]

But you can machine the holes to run bigger injectors. That's ok

 

[milkandoj]

There was a vendor on here or another forum, Mr parts im pretty sure, who had rails for 150AUD this week. And you could screw -An fittings on.

 

[EVO-00X]

Locally, you can get BMI on EBay Joey, they take a -10AN fitting.
AEM's 4G63 fuel rail is a 1/2" bore which will be plenty to fuel what you need.
I run a Holley billet fuel rail which I bought from Jeff at Turbotrix a while back. They have a 9/16" inner bore. Jeff sent it to me with -12AN fittings but I changed them back to -8AN for my engine
The part number is HLY 534-114 and its a solid and sexy piece of gear. Depending on the injectors you use you may have to file back a few notches to clear the rail but its piss easy to do. I did it to mine and then had it fully polished B) Its diameter is big enough to flow enough juice if I wanted to go E85 with big fuel injectors later.

 

[ENGINR]

You got pics of this fuel rail Rob?

 

[EVO-00X]

Yep, kind of... bit hard to see it in my engine bay pics but here's a few

Untouched form and anodised silver externally when you buy them new

The fuel rail when in the Turbotrix DSM



Bought it, changed to -8AN fittings, polished it up and gave it a new home
(pics attached) You need to use the silver spacers + OEM black plastic spacers when fitting them to your car.