apexi avc anyone used one

[boosted22]

just wondering if anyone has used a apexi avc before, just wirred one in, and having a liitle trouble, the display seems to display everything as working fine boost goes up to the wright pre setting, but it just feels as if theres no difference, shes only a stocko, but i was just looking at up'n the boost while i sort the other motor out, the apexi reads in kg cm2 crap which i set at .80 which i thought was about 11psi ? but doesnt feel any difference from before i fitted it.

 

[olly]

just wondering if anyone has used a apexi avc before, just wirred one in, and having a liitle trouble, the display seems to display everything as working fine boost goes up to the wright pre setting, but it just feels as if theres no difference, shes only a stocko, but i was just looking at up'n the boost while i sort the other motor out, the apexi reads in kg cm2 crap which i set at .80 which i thought was about 11psi ? but doesnt feel any difference from before i fitted it.

did you have an existing boost gauge? did you know how much boost you were running prior to setting it to 11psi? if not, it could have already been running at 11psi or close to, ~10 psi which would make no noticeable difference

 

[boosted22]

nah no boost gauge, it's a complete stocka, I thought stock boost on 93 gsr are 6-7 psi ?.

 

[shadow]

Change the boost setting on the avcr to "off". Then do a couple of power pulls with peak hold enabled (showing boost) and it will tell you what you were running (just off actuator).