Attention All 4g63 Fans.

4GTuner

Help Support 4GTuner:

M

Mitsi-undai

Member
Joined
Jan 27, 2007
Messages
52
Location
QLD, Australia
Hi there. I am new to these forums. I used to be a member of the 4g website and the sigmagalant.com website and unfortunalty my old sigma wagon was not all it could of been, (probly my fault) any hoo.

I am glad I finaly found a replacment site for my info and posible swaping power. Till now I have been just going through a website called /www.hyundaiperformance.com as I have a car called Hyundai Lantra but it is packed with a mitsi motor similar to the 4g63 only it is not turbo and is only 1.8lt but all the ptential of both posibilitys.

I have put on a set of extractors (tri y, 1 5/8th piping(to small) and lost WHP about 15 ponies) with a 2.5inch sports system with the big 4 inch canon out the back.

I have modified the induction some what, not to my liking(I want to get rid of the standard mitsi MAF) and made it suck mostly colder air.

The amount of tourq this thing has tells me there is plenty of potential, I have lower kings allround and Kumo 195/50 15's. Thats about it for now. I have just bought the SAFC from ebay and can't wait to install and try out. My dyno reading is 91.6 WHP but the graf shows I am a little lean right throu the curve.

I do 0-100 in 9.2 sec and do the quater in around 17 sec(unoficail) can't wait to hit Willowbank for a run. I will be installing a wetnos 50shot in the very near future.
Well thats about it for now. Will post updates if you guys are interested. Seeya. 8)
 
Hi there. I am new to these forums. I used to be a member of the 4g website and the sigmagalant.com website and unfortunalty my old sigma wagon was not all it could of been, (probly my fault) any hoo.

I am glad I finaly found a replacment site for my info and posible swaping power. Till now I have been just going through a website called /www.hyundaiperformance.com as I have a car called Hyundai Lantra but it is packed with a mitsi motor similar to the 4g63 only it is not turbo and is only 1.8lt but all the ptential of both posibilitys.

I have put on a set of extractors (tri y, 1 5/8th piping(to small) and lost WHP about 15 ponies) with a 2.5inch sports system with the big 4 inch canon out the back.

I have modified the induction some what, not to my liking(I want to get rid of the standard mitsi MAF) and made it suck mostly colder air.

The amount of tourq this thing has tells me there is plenty of potential, I have lower kings allround and Kumo 195/50 15's. Thats about it for now. I have just bought the SAFC from ebay and can't wait to install and try out. My dyno reading is 91.6 WHP but the graf shows I am a little lean right throu the curve.

I do 0-100 in 9.2 sec and do the quater in around 17 sec(unoficail) can't wait to hit Willowbank for a run. I will be installing a wetnos 50shot in the very near future.
Well thats about it for now. Will post updates if you guys are interested. Seeya. 8)
 
Hi there. I am new to these forums. I used to be a member of the 4g website and the sigmagalant.com website and unfortunalty my old sigma wagon was not all it could of been, (probly my fault) any hoo.

I am glad I finaly found a replacment site for my info and posible swaping power. Till now I have been just going through a website called /www.hyundaiperformance.com as I have a car called Hyundai Lantra but it is packed with a mitsi motor similar to the 4g63 only it is not turbo and is only 1.8lt but all the ptential of both posibilitys.

I have put on a set of extractors (tri y, 1 5/8th piping(to small) and lost WHP about 15 ponies) with a 2.5inch sports system with the big 4 inch canon out the back.

I have modified the induction some what, not to my liking(I want to get rid of the standard mitsi MAF) and made it suck mostly colder air.

The amount of tourq this thing has tells me there is plenty of potential, I have lower kings allround and Kumo 195/50 15's. Thats about it for now. I have just bought the SAFC from ebay and can't wait to install and try out. My dyno reading is 91.6 WHP but the graf shows I am a little lean right throu the curve.

I do 0-100 in 9.2 sec and do the quater in around 17 sec(unoficail) can't wait to hit Willowbank for a run. I will be installing a wetnos 50shot in the very near future.
Well thats about it for now. Will post updates if you guys are interested. Seeya. 8)
 
WOW. 238 would be sweet. I am a little more modest. I can't hold traction the way thing are. I would be happy just getting over the 120WHP mark, or alternativly get into a 14 sec 1/4.
Thanks for the welcome man.
 
WOW. 238 would be sweet. I am a little more modest. I can't hold traction the way thing are. I would be happy just getting over the 120WHP mark, or alternativly get into a 14 sec 1/4.
Thanks for the welcome man.
 
WOW. 238 would be sweet. I am a little more modest. I can't hold traction the way thing are. I would be happy just getting over the 120WHP mark, or alternativly get into a 14 sec 1/4.
Thanks for the welcome man.
 
Yeah, 238 was pretty good.. but with a FWD there is not much point for that much power... I guess that is why I decided to go AWD ... :)
 
Yeah, 238 was pretty good.. but with a FWD there is not much point for that much power... I guess that is why I decided to go AWD ... :)
 
Yeah, 238 was pretty good.. but with a FWD there is not much point for that much power... I guess that is why I decided to go AWD ... :)
 

Latest posts

Back
Top