Bazengs BUY ME Garage Sale ****NEW PARTS!!!!****

[bazeng]

Hi All,

Time to clean out the garage and prepare for my next setup.
Most prices listed below. Some prices TBC.

For photos or more info - please pm me and I will email photos.
If I get a chance, I will upload them onto the forum.

All parts looked after.

For sale:

1. Low profile and ported oil filter housing (6bolt) - $SOLD - had a few wanting this but first in got it.
2. Standard N/A oil filter housing (6bolt) - $50.00

3. White Galant VR4 Aus spec bonnet with Evo 3 vents - Ex Bcnya Bonnet - $200.00 SOLD
4. Davies Craig EWP - 110 - used for 1 hour - For use with engine OR water to air setup - $125.00 - $SOLD
5. VR4 SS cold side intercooler piping - ex Bcnya - $SOLD
6. Exhaust heatwrap - lots!!! - $SOLD
7. Aus Spec VR4 3.5 - NQZK gearbox - used - $SOLD
8. VR4 4 bolt setup - viscous lsd - $SOLD
9. 4 x VR4 450cc blue top injectors - low impedance - used - $100.00 $SOLD
10. 4 x RX7 550cc injectors - high impedance - used - $SOLD
11. VR4 / EVO - Repco uni joint - new - $SOLD
12. VR4 fuel rail - modified - dash 8 input (welded on) - ceramic coated - $SOLD
13. Multiple shifter arms - $15.00 each

14. XF Tb - powder coated - $SOLD
15. VR4 rear trailing arms with polyurathane bushes - $50.00 SOLD
16. Momo Autotek steering wheel - used - great condition - $90.00

17. Momo Corse steering wheel - used - great condition - $SOLD
18. Whiteline Galant GSR / SE / AMG rear sway bar - $SOLD (I believe currently obsolete)
19. EVO III OZ racing 15" rims - $SOLD
20. VR4 Jspec Cylcone intake manifold - $50.00 SOLD
21. Hyundai Elantra intake manifold - $35.00

22. BBS LM 5x114 17x8" rims with KU36 95% tread tyres (offset tbc) - $2500.00 SOLD
23. Corvette front brake setup - includes Corvette alloy twin pot calipers - RDA dimpled and slotted galvinized rotors - alloy brackets - PBR performance pads - 5x114 stud pattern - $750.00 swap over - Cost price was over $1200.00

24. Kiggly Racing crank angle trigger - new - kiggy specs -RRP $210.00 USD ex shipping - $SOLD
25. Oil stat - regulate your oil temp to 80 deg C - ported and welded -10 fittings - $100.00 - $SOLD
26. Racing Hart - 18x7.5 4/5 x 114 multistud pattern with KU31 90% tyres - $1800.00

27. Camaro front brake setup - includes Camaro alloy twin pot calipers - RDA rotors sloted galvinized rotors - alloy brackets - EBC Green pads - 4x114 stud pattern - $750.00 swap over - Cost price was over $1200.00 SOLD
28. OZ racing 17" EVO V rims (5 pieces) - all resprayed - 4 perfectly round ones, 1 with tiny flat spot on outer edge but cannot feel when driving. $offers
29. VR4 / EVO clutch forks - used -RRP $275.00 - $100.00
30. Garret GT35 / 1.06 turbo setup. inc 6boost ceramic coated manifold, tial v44 ex gate, 4" ceramic coated dump pipe, custom alloy radiator, custom 4" intake pipe + k&n filter, oil and water lines, front engine mount modified to suit clearance of the turbo, mount has polyurathan insert, power ported compressor cover. Ran 10.9 @ 136mph with light 1.9 60 ft launch with .82 exhaust housing. Should be approx 70hp more with the 1.06 rear housing. Lower turbo outlet pipe included - $TBC - $SOLD
31. KU Engineering intake manifold with billet tb. Used on BCNYA 10 sec VR4 with NOS direct injection setup - $ SOLD
32. Scorched ignition leads to suit VR4 Galant (not sure if JSPEC / AUS SPEC - will to confirmed) - new - $40.00
33. 4g63 VR4 6bolt long motor - forged pistons - condition - Running when pulled out - would recommend a freshen up - $1000
34. Bosch 044 external fuel pump and Billet bracket - $100.00 SOLD
35. SX fuel pressure reg RRP- $280.00 - (new in box) - $SOLD
36. VCU Eliminator - $100.00
37. Turbosmart SS Type 3 trumpet + spring - convert your plumback to atmo - $25.00
View attachment 9571
38. Momo Shift Knob - $50.00
View attachment 9572
39. BMI - Billet alloy Spark plug cover - never used - $50.00
40. Silver powder coated mounts - Gearbox - $25.00 L shaped Engine mount without P/S section - $25.00
View attachment 9575
41. GVR4 custom gauge pod - aircon cluster replacement - fibreglass. to suit 60mm gauges (apexi - but should fit others) - $50.00
View attachment 9576
42. Bosch 044 external fuel pump with -8 adaptor fittings - used for approx 10,000kms - $100.00 SOLD
43. Manual bleed valve - Billet alloy - $50.00 SOLD
44. Bosch EV14 1600cc injectors - upgrading to 2200cc injectors. modified to bolt into 4g63 rail. 1000kms old - $600.00
45. Rochester 660cc injectors - was planning to run this as a second set of injectors with my 1600cc injectors. Deciding to go 2200cc injectors. - $150.00 SOLD
46. Custom VR4 Radiator - EX E39A. I paid $1200.00 for this - made by TRIKFAB. Selling for $500 with fan and custom bracket to suit galant VR4. - comes with upper radiator hose
http://www.trikfab.c...Gallery_VR4.htm
Core: 560mm (w) x 360mm (h) x 60mm (d)
Width with end tanks - 660mm
Fan - 13" puller + bracket
View attachment 9584
View attachment 9583
View attachment 9582
View attachment 9581

All located in MELBOURNE VIC - can post at buyers expense.

 

[bazeng]

Garage sale open!!

 

[jman_4114]

Hey mate what does TBC stand for???

 

[DOUGMO]

it means free

 

[jman_4114]

Yeah I wish it meant free!!

 

[DOUGMO]

it actually means Two Beer Cartons.





































or it may mean "to be confirmed" B)

 

[BMGTZ]

interested in the OZ wheels.....pm price please. or will send two cartons on beer

 

[EVO-00X]

1. Low profile and ported oil filter housing (6bolt) - $80.00

Got a pic Baz? If thats ported to lower the oil pressure then I'll take it

 

[cbgsr]

Is the ku manifold for a big or small port? interested if small

 

[bazeng]

Sorry, big port. Pics up soon.

 

[oscar]

Baz,sell me your VR 4 RS box.I have VR4 twin pots and rotors.Swap plus $$$$$$?????????

 

[bazeng]

Baz,sell me your VR 4 RS box.I have VR4 twin pots and rotors.Swap plus $$$?????????

I do have a VR4 RS box with a kaaz front lsd and TRE centre spool in the AMG at the moment.
If I could get my hands on a decent FWD box and have it built I would consider selling the RS box.

Or an AUTO front wheel drive with viscous LSD.

AMG is more of a cruiser, so Auto would suit it.

 

[EVO-00X]

Pics or cursed thee who runs over his lame dog in the driveway then tries to con buyers into buying goods to pay for vet expenses! :lol:

 

[JayRome]

I do have a VR4 RS box with a kaaz front lsd and TRE centre spool in the AMG at the moment.
If I could get my hands on a decent FWD box and have it built I would consider selling the RS box.

Or an AUTO front wheel drive with viscous LSD.

AMG is more of a cruiser, so Auto would suit it.

i have 2 manual FWD gear boxes you could rebuild.... and a 5speed GETRAG you would mix and match into the FWD boxes?....

also should have shortly, twin pots with matching slotted rotors with 5 stud already drilled out...

 

[bazeng]

Some photos up!!!!

More to come!

 

[Gianni]

So how much to buy the garage lol

Good luck selling my Freind

 

[bazeng]

-CONT-
More pics for the opening thread.


28. OZ racing 17" EVO V rims (6 pieces) - all resprayed - 1 buckled - 1 slight flat spot but spins fine. Total 4 perfect round wheels, 1 good spare, 1 good for nothing - $500 starting bid...

ebay

http://www.ebay.com....984.m1555.l2649



29. VR4 / EVO clutch forks - used - RRP $275.00 - $100.00
30. Garret GT35 / 1.06 turbo setup. inc 6boost ceramic coated manifold, tial v44 ex gate, 4" ceramic coated dump pipe, custom alloy radiator, custom 4" intake pipe + k&n filter, oil and water lines, front engine mount modified to suit clearance of the turbo, mount has polyurathan insert, power ported compressor cover. Ran 10.9 @ 136mph with light 1.9 60 ft launch with .82 exhaust housing. Should be approx 70hp more with the 1.06 rear housing. Lower turbo outlet pipe included - $TBC SOLD














31. KU Engineering intake manifold with billet tb. Used on BCNYA 10 sec VR4 with NOS direct injection setup - $SOLD



32. Scorched ignition leads to suit VR4 Galant (not sure if JSPEC / AUS SPEC - will to confirmed) - new - $40.00
33. 4g63 VR4 6bolt long motor - forged pistons - condition - SUIT FRESHEN UP - EX SIVART - $1000
34. Bazeng 10 sec vr4 fuel setup - Bosch 044 external - Bosch filter - Surge tank - Billet brackets x2 - all fittings and braided lines (used) - - $450.00 SOLD

35. SX fuel pressure reg RRP- $280.00 - (new in box) - $200.00 SOLD

 

[EVO-00X]

Baz, I'll take item number 1 - the low profile housing thats been ported.
I need to lower my oil pressure a bit and that'll save me some stuffn around.
PM me your bank details pls

 

[Sol_86]

PM'd

 

[phaser]

your a funny bastard baz, i thought my house was bad. now i know what your old man talks about ahaha