Blox cams

[DZN60]

Hey anyone using blox cams? Or heard good or bad things about them I found them on dsm graveyard

 

[bazeng]

I know alot of the HONDA boys use Blox parts..

Quality wise, looks ok (fuel pressure regs etc)

I haven't seen their cams

 

[Missile]

What are the specs? And what kind of price are you looking at?

BC/Crower are both relatively cheap for a tried and tested product...

 

[GSRWRC]

Kelford or Tomei 272s are pick of the bunch if you read Evo M forums. The likes of AMS and Bushur swear by them.

BC much like HKS 272s are very mild cams. Not all 272s are created equal, in fact far from it.

 

[JC evo1]

stick with FP4r, TX272 or gsc S2

 

[DZN60]

They are regrinds is that a bad thing?

 

[VR-4Squid]

They are regrinds is that a bad thing?

not really. depending how much has been taken off the base circle of the lobe you may need to put shims under the lifters to compensate. If you don't the lifter may not be able to extend far enough to support the rocker arm at all times. removing the hardened surface of the cam lobe is often cited as a problem with reground cams, however this is only an issue for engines which use solid rocker arms - with roller rockers such as ours, it's not a problem.

 

[runuts]

Kelfords are cheap enough to not bother with lower spec cams

 

[DZN60]

Kelfords are cheap enough to not bother with lower spec cams

looking at them now...do you run these?

 

[runuts]

I run GSC S2's... grind is pretty much identical to Kelford TX272's. I also have JUN272 and Kelford TX280's that I'll do back to back testing with at a later date.

 

[DZN60]

I run GSC S2's... grind is pretty much identical to Kelford TX272's. I also have JUN272 and Kelford TX280's that I'll do back to back testing with at a later date.

what valve springs would you use with the kelford 272's

 

[runuts]

I'm using Supertech Duals. Any of the quality duals or beehives would be well suited.

 

[JC evo1]

I run GSC S2's... grind is pretty much identical to Kelford TX272's. I also have JUN272 and Kelford TX280's that I'll do back to back testing with at a later date.

facepalm :lol:

 

[runuts]

lol

 

[tUfRiCe]

kelford 272's are pretty aggressive you'd want cam gears and stujff to tune them i had them for awhile not as fun as i thought pulled likie a train once they were up and going though pulled till 8k