BRAKES

[YellowEvo1]

I'm looking at replaceing my front and rear brakes. Both the pads and rotors need to be replaced. I know that front and rear pads are the same as an Eclipse or Galant. My problem is the rotors, Eclipse's have use a 5 bolt hub so I obviously can't use rotors for it on my Evo 1. I'm not sure want the Galant uses tho but for now i'm going to assume the same. Does any one know what car I can get rotors for to fit my Evo?? Remember I just cant go and by these parts specificy for an Evo thats why i'm asking for your help.

 

[Hypo]

Measure your rotors and get blank rotors and get them drilled.

 

[GSRWRC]

Frrom VFAQ.com: "Any '93+ DSM AWD, '91+ non-turbo Dodge Stealth / Mitsu 3000GT, or '92-'96 Mitsu Diamante."

Should be a 276mm (10.8") rotor for the front

 

[Missile]

6th Gen Galants (87-93) should be 4x114.3 PCD. Eagle 2000GTX in Canada, but am unsure if they had the twin pots up front (276mm rotor)

 

[EVO-00X]

FRONT:
1. 1989-1992 Galant VR4 front rotors are 276mm same size and thickness as EVO I-III and are 4x114.3 stud pattern.
2. 1992-1998 UF Nimbus/ or Spacewagon as its sold over there are also 276mm rotors same size and thickness with a 4x114.3 stud pattern. Dont use stock Nimbus rotors though as the vent holes in them arent as big as the EVO/VR4 items. They'll work, but the bigger vented ones are better for cooling. Aftermarket companies like DBA etc will probably sell it the same part number as EVO/GVR4 anyway.

REAR:
1. Hmmm you might have to bite the bullet and get Mitsubishi 1993-1996 GSR Lancer rear rotors... they're the same size and thickness as EVO I-III. Perhaps a company like DBA could get them to you.

 

[JAP63]

FRONT:
1. GVR4 front rotors are 276mm same size and thickness as EVO I-III and are 4x114.3 stud pattern.

Remeber this is only on facelift/Rs/Monte carlo etc models, pre-facelift were smaller.