Car Not turning over

[gsr8u]

Just done the 2lt conversion I am getting spark and fuel but it is not turning over. Have the evo zero engine with evo 3 ecu . It is earthed properly . Have no ideas, does anyone have an


Cheers

 

[Liberoz]

are you useing a vr4 engine loom to the ecu?

 

[Hypo]

Starter
Battery
Can you crank it over by hand?

 

[cblancergsr]

is there fuel in the tank

starter motor could be faulty

agreed crank over by hand too double check that its not seized

maybe check how much volts are in the battery when you crank it over maybe batterys dropped a cell

 

[progkamol]

try connect a jumper pack (battery pack) directly to the terminals (without bolting on to battery) and try to start it ... this happened to a chrysler neon at the work shop once. Even use the jumper pack on the battery and terminal the car still won't turn over. Ended up having to get new battery.

 

[Dean]

narrow things down and cancel them out one by one.
see how many volts the battery is putting out, then take it from there, if its running around the 14volt mark, battery and charge is fine, it may be a starter motor problem, if its below this, it may be battery or alternator related.

 

[gsr8u]

thanks for the replied turned out to be blocked injectors , put in my 450s and it turned over straight away. My 510s that came with the motor were so blocked that it wasn't letting any fuel in the motor. I had them cleaned and flow tested and works now

 

[progkamol]

hmmm ... didn't think of that coz u said u getting spark and fuel ... anyway good to hear that its all solve for u

 

[gsr8u]

yeah i was getting spark and fuel in the rail , sorry wasnt a very detailed message , and i am using a gsr wiring loom.

in a couple of days i will be posting a detailed listing of all the parts needed to do the conversion properly ,

evo-oox gave me some input but there was much more to be done eg. brackets and mounts

thanks for you'lls help

 

[cblancergsr]

good too hear