CC GSR LIFTERS

[Hiran]

Hi guys I have a Totaly stock 1994 CC GSR. The lifters have started to make some noice. I am planing to do my motor up to get a bit more power out of it.So what i need to know is.



WHAT LIFTERS SHOULD I BUY?

WHERE CAN I BUY THEM FROM?



Thanks

 

[EVO-00X]

Meek sells the revised 3G lifters for GSR's for $200 set.
Go here: http://www.meek.com.au/index.php?act=viewProd&productId=168

 

[THE411]

i think i have a set, brand new never made it on to the car. Shoot me and offer if your keen

 

[Smutt]

How long has it been since you changed your oil? Its probably getting thinner..

Try something easier than changing your lifters....

change your oil to a thicker grade... try Penrite 'sin' 15-70 fully synthetic... if it quiets them up, good. Then perhaps the next time you change your oil drop back to a 60 weight and listen for the difference..

I have used that grade oil for years! However im using a penrite synthetci 50 weight now, it was on sale but my lifters are intermittently noisy.. so next change im going heavier..

Find a happy medium that works for your lifters...

And or reset your valve clearance...

Or change your lifters..

 

[GSR94T]

Definitely change the lifters to the later 'revised' ones on Meek's website

They are so cheap now at $200 a set!!

They used to be close to $50 per lifter from Mitsubishi. Multiply by 16 = $800!!

Lifter noise can even be picked up by the knock sensor, causing the ECU to then pull timing, and thus performance loss

Too cheap to worry about, especially on a performance car like a GSR - It's worth having piece of mind.