crank angle sensor info

[MDK87]

Why is it called an exhaust sensor?

 

[4piknup]

Looks like what penny posted.

lol.jpg

Ok, that housing is not a evo4-5-6 exhaust either. And I dont think a evo9 housing is correct either. But the sensor itself in the side is normal looking, but Im not sure of the plug compatability. I have one of those housings and it has a sensor from a sohc v6 fitted.

These were available in the states as well, on a 3g. As that is how I got mine.

 

[4piknup]

More info. Rre has a list of the part numbers here:
http://www.roadraceengineering.com/1g2gheadswaptechtip.htm

Im digging through my thread on sensors, more coming...

 

[4piknup]

Taken from my thread on ecmlink forum, thanks to those that replied. Howell says:

Howell
Join Date: Oct 2005
Location: Morgan Hill, Ca (south bay)
Posts: 717

I don't have any pics on hand...but the cam sensor you are looking for can be found on 97-99 turbo DSMs. The parts can be found/purchased readily enough...but the pigtail/harness that connects to it can be a pain to find. The EvoIX has the same cam sensor plug, however. All of the needed mounting points can be found on the EvoIII head...you just have to drill/tap the end of the intake cam so you can bolt-up the trigger wheel.Road Race Engineering has some decent info on the subject, including OEM part numbers here:
http://www.roadraceengineering.com/1...waptechtip.htm
Hope that helps!

Brads also posted:

brads
Join Date: Jan 2002
Location: socal
Posts: 499
If the connectors/terminals/seals are needed for the 97-99 style cam sensor, I have a few on hand. I think they are used on some bikes as well, since Eastern Beaver stocks them too. That'd probably be easier to get for you since they are in Japan.

 

[4piknup]

So, either get the evo9 cam sensor, or the one listed on the rre site (they say the whole setup can be got for $100 or so.

Or get the cheap 4-6 sensor and swap in the plug to your loom.


And dont forget the crank sensor is as I posted in 1st post. (Forgot what the op wanted there for a minute)

 

[Super Top]

When I punch in the chassisnumber of my HSGR in ASA I get this.

 

[4piknup]

When I punch in the chassisnumber of my HSGR in ASA I get this.

While you are there, can you get the part number for the chopper wheel that triggers that cam sensor. Please.

 

[Super Top]

You mean this one?
That's this part number.: MD327621

 

[4piknup]

Thankyou

 

[Super Top]

I forgot the crank angle sensor.

 

[Super Top]

Camshaft sensor: MD327107
Camshaft chopper wheel: MD327621
Crank angle sensor: MD300101

 

[4piknup]

Same part numbers as in the rre page linked above. Cool.

 

[penngwyne]

Hi lads can any one help i need a new crank sensor for my HSGR can't find one for the evo 3 dose any one know if they are the same as the evo 4-5-6 as these are easy to get hold of. Thanks in advance for any info steve.

How did you go with this Steve?

 

[Steve B.]

hi guys she is up and running again i got a replacement crank angle sensor off ali express including delivery it cost around £10.00 so i was well pleased collecting the car back from the garage this weekend with full mot ready for the road . steve.

 

[evo-gsr]

Wow..thats so cheap!