Cusco engine mounts

4GTuner

Help Support 4GTuner:

When you think about it the mounts have been doing 15+ years of work... the metal component may actually be getting a little tired. Much cheaper than buying new Mitsi mounts. On the other hand I have never seen any of the mounts in my mitsi's suffer from cracking - hence the insert is sacrificial.

$300 isnt too bad for a set of complete mounts - RA inserts will be a shed load more than that.
 
ra engine mounts

i just bought a set of ralliart mounts paid $350 but they where only the inserts.
looking at the cusco ones they are a solid design rather than the sectioned design of the ralliarts.
so NVH levels would be much higher , i would reckon that they'd be better for performance but might prove to be a bit to much for the street.
depends on what your going to use the car for.
 
i just saw them on perfectrun and thought i'd ask people's thoughts however since i have Ralliart front and rear i need to do something about the other side mounts...i still have forward back movement :(
 
For a bit of info i went to my local Mitsubishi dealer and ordered the 2 roll stop mounts and they cost 60 and 40 odd dollars, thing is they had them in stock in Sydney and I got from a dealer cheaper than anywhere else I've seen.

As for the other 2 mounts I don't know if there still available but here's the Part numbers:

RA871602K1 Ralliart Engine & Transmission Insulator Hardened rubber mount. 2 req'd.

RA581297K1 Ralliart Engine Roll Insulator, Forward Hardened rubber mount.

RA309269K2 Ralliart Engine Roll Insulator, Rearward Hardened rubber mount

I got these numbers off this site somewhere.

Cheers
 
the cusco ones are a complete replacement set.. you can buy them on ebay for about $450 from nahux i think (local).
sikwpn has them in his project car and they're solid. much better than messing around with ra inserts imo.
 
FYI the complete mounts + brackets from Mitsubishi cost more than the above. I was going to get a set myself and I think it was around the $500 mark for just 2 of them (cant remember which 2)
Complete set for $450 isnt too bad. I agree with nk. Saves alot of mucking around.
 
Dean said:
FYI the complete mounts + brackets from Mitsubishi cost more than the above. I was going to get a set myself and I think it was around the $500 mark for just 2 of them (cant remember which 2)
Complete set for $450 isnt too bad. I agree with nk. Saves alot of mucking around.
Click to expand...

seems like alot of weird prices being spoken of doesnt compare to
here > http://meek.com.au/index.php?act=viewCat&catId=9
 
Sorry for the epic thread revival, but I'm looking at finalising parts to drop the 4g63t into my CC GSR, and the timing belt side 2-piece engine mount is one of the last things I need - do the Cusco ones come 2-piece (block & chassis), or is it just the chassis mount? Don't want to pay $500 for a two piece mount like I've been quoted...

Cheers!
 
Those mounts sell for around $60-80 each, problem is finding them

Which is a reason some sellers up the prices to $500 hahaha, unfortunately people fall for it :(
 
Yeh i meant used, easy to find the chassis mount, GSR500 has 1 for $60 and Rickii was around $80
The 1 that bolts to the block is the hardest to find, everyone grabs them right away for their 6 bolt conversion
Also no one is gonna strip an engine to sell that mount, unless the engine is busted/blown
 

Similar threads

rock_it
Anyone bought off PerfectRun.jp
Replies
4
Views
737
rock_it
rock_it
captainTeeBag
Please help with lower engine mount and cv advice
Replies
1
Views
479
BMGTZ
BMGTZ

Latest posts

Back
Top