Cyclone intake and WolfV4 ECU

[tharaka]

Will the Cyclone intake work with a Wolfv4?

I'm not sure if its a solenoid that controls the butterflies, or if its electronically controlled... I know there's vacuum lines for something, but why is it that keydiver has to put in a specific code for it to work on a US ecu?

 

[DOUGMO]

you should be able to set the wolf up to run it if necesarry,

arent they vacuum controlled?

 

[tharaka]

you should be able to set the wolf up to run it if necesarry,

arent they vacuum controlled?

thats what i thought
but when people in america want to run the cyclone, they have to get it programmed into the ecu chip to control it

 

[to4garret]

all you need is a rpm dependant output from the wolf, i dont know how many they have, but if you have that, then just run it to the stock cylcone soleniod and you'll be fine.

in the states they get it written into their ecu's cause most of them didnt have cyclone and the stock output from the ecu is used for their emission controls.

 

[DOUGMO]

do you have a v4 or a v4+?

 

[bazeng]

the v4 has 4 aux's...

you can make the wolf activate the solenoid at a certain rpm or boost or tps or load.....

 

[DOUGMO]

i though v4 only had 2 and v4+ has 5?,

either way you can control it. if its a v4 then the aux may be used for other things though like boost control etc...

 

[bazeng]

thats right...

2 aux's not including idle and boost