DIAGNOSTIC READER For EVO 3

[EVO-07]

Does anyone here know any anyone or any workshop who has something like MUT to diagnostic EVO 3... (To be honest, I dont know much about this technical staff) but WILLING TO PAY if anyone can help me... I just want to check all the sensor of the entire car...what sensor is faulty because sometime my check engine light just come up few second and dissapear again....

I don't think I want to buy the hardware or software either because I wouldn't have a clue what to do with it... Most of the workshop these day they only able to to OBD2 port only which is international std plug for all the newer car these day, they good for EVO 4 > Above...however, those evo 3 are different, they still have the older one and I don't know what it is call. SO Desperately NEED HELP...

 

[vsthis]

I think you need to talk to jeff at techsport ph: 03 97209300

 

[EVO-07]

I think you need to talk to jeff at techsport ph: 03 97209300

Thanks, but I've done that ages ago... his MUT only read OBD2...which is evo 4 and above...

 

[shadow]

Are you talking about an OBD cable that will plug into the diagnostic port and give out error codes etc? As in the cable sold at MEEK?
Take a look at their website, You can use that cable and a cheap palm computer and free software such as MMCD it think it was called? If this is what your talking about....

 

[EVO-07]

Yeah thx for the input...something like that is the exact great answer but I don't want to get one because I don't know much about technical stuff so I don't think I want to touch those stuff...so it will be great if someone who actually already got one and can do it in my car and I'm willing to pay top dollar for it...

 

[CLuTZ]

do you want to datalog?

 

[EVO-07]

do you want to datalog?

Yes, pleas if you know how to or someone who can do it for me

 

[CLuTZ]

do you want to datalog?

Yes, pleas if you know how to or someone who can do it for me

Okay what you need is 4 things.

1) A palm pilot, easily found on ebay- i'd go for a M515, thats what I use- and its fairly easy to operate.

2) Serial port to palm cable- plugs your palm pilot into your datalogging cable

3) Logger cable, plugs into the port, and are found HERE

4) Software. I use MMCD, which is free, from this website:

http://mmcdlogger.sourceforge.net/

Once you get all of these bits, i'm sure someone will be able to show you how to use it, if you attend the next cruise!

Here's a taste:

Best of luck


dre

 

[SIVART]

pm sent

 

[EVO-07]

THX

Thanks everyone for the input. I will try it