Hey guys I recently installed ECM link in my car and I don't have much of an idea of what I'm doing. If there is someone who has one and is happy to give me a little bit of a rundown on it then I can swing a carton their way etc.
ECM link help
- Thread starter aussievr4
- Start date
Help Support 4GTuner:
Don't have one but read up about them. I cant help you but these pages might get you going if you haven't read it already.
http://www.ecmtuning.com/wiki/ecmlink101
http://www.ecmtuning.com/wiki/ecmlink101
4piknup
master of none
You need a wideband as well.
Do you have one?
There is demo on ecmlink page to set the idle and cruise this is good info but I had to read it about 10 times to work out what was being said.
Thats as far as I got. Good idle and cruise and no knock and fat fuel on load and stock boost...its safe and slow till we going again.
But my understanding is once you have the cruise and idle set. You keep pulling timing till you get knock and then back it off a touch (petrol not for e85) then lean the fuel off till you get to your selected afr. Then add some boost and retune the top end.
In a nutshell. ..
Do you have one?
There is demo on ecmlink page to set the idle and cruise this is good info but I had to read it about 10 times to work out what was being said.
Thats as far as I got. Good idle and cruise and no knock and fat fuel on load and stock boost...its safe and slow till we going again.
But my understanding is once you have the cruise and idle set. You keep pulling timing till you get knock and then back it off a touch (petrol not for e85) then lean the fuel off till you get to your selected afr. Then add some boost and retune the top end.
In a nutshell. ..
BMGTZ
Grumpy old man from the school of hard knocks
drop by and I can run you through the basics
