ECU remapping

[bennyp85]

looking for someone to remap a GSR/EVO socketed ECU in melbourne.
spoke to creatd, said they dont do this sort of thing anymore.

 

[BMGTZ]

looking for someone to remap a GSR/EVO socketed ECU in melbourne.
spoke to creatd, said they dont do this sort of thing anymore.

ECMLITE is the go . you can then get some one to tune the ecu.....then make other changes as the car needs

 

[bennyp85]

yer i plan on getting that but i just need a remap to get a conversion up and running.

 

[BMGTZ]

yer i plan on getting that but i just need a remap to get a conversion up and running.

just get Tom to supply it with the evo 8 maps installed...it will then be fine to run as long as you use the evo123 afm. you will need to get the jumper mod done as well as a socket job

 

[Dean]

Springy motors did my ecu, give them a shot maybe, but eventually as Brian has mentioned, i just went with ECMLink, will never go back.

 

[bennyp85]

cheers guys , thanks for the help

 

[bazeng]

I'm considering converting my Motec M4 ecu to a full ecm link ecu.

I just can't be bothered rewiring etc etc.

You guys have any tips on what is required with the ecm link?
What should I get?
How easy is it to tune?

 

[DOUGMO]

I dont think the resolution will be good enough for a car/s with your level of mods baz.
they are a top unit and brilliant bang for buck but they cant be compared to autronic/motec etc..

 

[bennyp85]

all good !!
swapped the chip from a busted evo ECU into the GSR ECU.
good thing they're both socketed eprom.
found this on another website, might help other ppl out

MD175663 - 1992 JDM gsr - no eprom
MD187040 - 1993 AUS gsr - eprom
MD193308 - 1993 JDM gsr - eprom
MD307377 - unknown year gsr - eprom
MD317097 - 1994 AUS gsr - eprom
MD325070 - 1995 JDM gsr - no epro

 

[brisvr4]

Sorry I couldn't call today Barry, I'll give you a call about link tomorrow mate
And as for not being able to handle your mods, I think you'll be surprised.
There are a few guys over in the states road racing on these, at least one guy has just made over 1000 whp

I didn't even make it into the 1/4 mile top 30 with my 11.42
In fact, your fastest time to date may have just scraped in at #30

 

[PROGSR]

all good !!
swapped the chip from a busted evo ECU into the GSR ECU.
good thing they're both socketed eprom.
found this on another website, might help other ppl out

MD175663 - 1992 JDM gsr - no eprom
MD187040 - 1993 AUS gsr - eprom
MD193308 - 1993 JDM gsr - eprom
MD307377 - unknown year gsr - eprom
MD317097 - 1994 AUS gsr - eprom
MD325070 - 1995 JDM gsr - no epro

just added to the ecu list

MD175663 - 1992 JDM srI GSR - no eprom
MD187040 - 1993 AUS srI GSR - eprom
MD193308 - 1993 JDM srI GSR - eprom
MD307377 – 1994 JDM GSR/Libero Gt - eprom
MD317097 - 1994 AUS GSR - eprom
MD325070 - 1995 JDM srII GSR/Libero Gt - no eprom
MD317197 – 1995 AUS srII GSR – no eprom
MD187701 - 1993 EVO I RS -
MD311121 – 1993 EVO I GSR -
MD312468 - 1994 EVO II GSR -
MD322364 - 1995 EVO III GSR -

 

[CLuTZ]

All the facelift GSR/Libero stuff is non-eprom

Easy fix tho!