JSTYLE
I AM THEEE DYNO QUEEN!
Looking at selling my motor as i will be selling the car too..,
Motor has done less then 3000km and has been serviced and regularily maintained.
compression test will be done for this who are keen, can be taken for test drives this week.. as the motor will be coming out.. so if you want to get it tested at a mechanics or whatever please let me know ASAP.
Specs:
Reco standard head $500 to reco head
new steam seals
guides etc..
Custom Rods
Forged Pistons $900
Static Compression 8.1:1
High boost twin layer headgasket $150
ARP Head studs $250
560cc Injectors $350 cleaned
60mm throttle body $100
Ported intake plenum to suit
Custom headers $350
Mitsubishi Franky Turbo 500hp unit $1500
Custom dump pipe
Custom engine management
055 Magna AFM
Custom clutch $650
some of the above samples are what its worth... dont forget to take into consideration the amount it cost in labour to machine/prep the motor and all that.. (machine/gaskets etc.. ~$2000)
Missed anything?
Basically a plug and play... all you need is:
exhaust system
FMIC
fuel pump to suit
and you will have a good street powered motor
PRICE: $Price range $3900 - $5000 =) (amuse me with offers)
Jon
Motor has done less then 3000km and has been serviced and regularily maintained.
compression test will be done for this who are keen, can be taken for test drives this week.. as the motor will be coming out.. so if you want to get it tested at a mechanics or whatever please let me know ASAP.
Specs:
Reco standard head $500 to reco head
new steam seals
guides etc..
Custom Rods
Forged Pistons $900
Static Compression 8.1:1
High boost twin layer headgasket $150
ARP Head studs $250
560cc Injectors $350 cleaned
60mm throttle body $100
Ported intake plenum to suit
Custom headers $350
Mitsubishi Franky Turbo 500hp unit $1500
Custom dump pipe
Custom engine management
055 Magna AFM
Custom clutch $650
some of the above samples are what its worth... dont forget to take into consideration the amount it cost in labour to machine/prep the motor and all that.. (machine/gaskets etc.. ~$2000)
Missed anything?
Basically a plug and play... all you need is:
exhaust system
FMIC
fuel pump to suit
and you will have a good street powered motor
PRICE: $Price range $3900 - $5000 =) (amuse me with offers)
Jon