Evo 1/2/3 Chips - Anyone Interested?

[razza]

Hi All,
I have spent a fair bit of time lately working on Lancer Evo 1/2/3 Chips. They have been tuned on a dyno to get the most out of the factory setup. The features I can enable in the chip are:

# Performance Fuel/Timing Maps
Suited to 98 Octane Fuel. Tuned on Dyno.

# Injector Compensation
To run larger injectors of your choice. For example install your 700cc Sard Fuel Injectors and the car will run and idle like it is standard.

# Deadtime Adjustment
Deadtime adjustment to suit alternative Fuel Injectors.

# Fuel Cut Removal
Increase in point of Fuel Cut or completely removed.

# Speed Cut Removal
To remove the factory 180kph speed limit

# Launch Control/Stutterbox
Used to build boost on the line. Put your foot to the floor while the car is stationary and the car will build boost. Watch the follow videos to give you a better idea:
http://smg.photobucket.com/albums/v621/EXPLCT/?action=view&current=Picture005.flv & http://smg.photobucket.com/albums/v621/EXPLCT/?action=view&current=Picture005.flv

Would there be a market for these over in Oz?

Thanks in advance.

Ryan

 

[Liberoz]

There is a flood of people here locally doing chips, maybe you should move here if you reflash later models they are making are fortune outta a reflash and dyno run.

 

[razza]

I wish I was over there with this weather!!!

 

[CLuTZ]

I wish I was over there with this weather!!!

Trust me, it aint much better in melbourne at the moment


To tell you the truth, I havent seen anyone advertise eproms for E1-3?

 

[DOUGMO]

I wish I was over there with this weather!!!

Trust me, it aint much better in melbourne at the moment


To tell you the truth, I havent seen anyone advertise eproms for E1-3?

me either

 

[acedsm]

More info

razza do you be keen to post the location on the maps here? Ie where this info can be modified? Like the fuel and ignition and injector compensation things?

 

[razza]

Re: More info

razza do you be keen to post the location on the maps here? Ie where this info can be modified? Like the fuel and ignition and injector compensation things?

Sorry but I see no benefit of posting the locations up. Spent many an hour locked in my room sorting all this out. I would suggest doing some reading on the net regarding the processor and going from there.

 

[JSTYLE]

Re: More info

razza do you be keen to post the location on the maps here? Ie where this info can be modified? Like the fuel and ignition and injector compensation things?

Sorry but I see no benefit of posting the locations up. Spent many an hour locked in my room sorting all this out. I would suggest doing some reading on the net regarding the processor and going from there.

Ill post this info up once ive sorted it out...

Also i think Meek sell modified Evo bins and also afew other guys i know who do them.

Jon

 

[Liberoz]

Chris @ Meek auto has been doing chips for vr4's and evo's for years and there's a few back yarders having a go with some results.

 

[Missile]

Chris @ Meek auto has been doing chips for vr4's and evo's for years and there's a few back yarders having a go with some results.

some awesome results...