evo 1-3 7 bolt 100mm crank
- Thread starter BooF
- Start date
Help Support 4GTuner:
4piknup
master of none
They reckon to source these from a Mitsubishi express 2.4.
I pretty sure these are SOHC when you are looking.
If you stumble upon a 6 bolt 2.4 crank, let me know.
I pretty sure these are SOHC when you are looking.
If you stumble upon a 6 bolt 2.4 crank, let me know.
cheers buddy was really after forged. i will look around for a 6 bolt crank for you
I know somebody who MAY have 2x 7-bolt EVO cranks from when he built the blocks up to 2.3 strokers using 4G64 cranks. I'll be seeing him tomorrow so will find out for you.
Otherwise I believe Advanced Jap had a 7-bolt stroker crank for sale.
Otherwise I believe Advanced Jap had a 7-bolt stroker crank for sale.
86-92 L300 vans run 6 bolt 4g64sLate 92 on run the 7 bolt.
Mk tritons (96 on) also run 7 bolt 4g64s, they are easy to find if you know where to look.Expect to pay $2-300+ for a decent one.
If its in a car you can tell by the front of the sump the same as a 6-7 bolt 4g63
Mk tritons (96 on) also run 7 bolt 4g64s, they are easy to find if you know where to look.Expect to pay $2-300+ for a decent one.
If its in a car you can tell by the front of the sump the same as a 6-7 bolt 4g63
An Aussie 1993-1998 UF Nimbus is also another source for a 2.4 crank. These cars are easier to find and many sell very cheap.
But if you are going to be making some horsepower, dont skimp... just go straight for a forged aftermarket crank and breathe easy
.
But if you are going to be making some horsepower, dont skimp... just go straight for a forged aftermarket crank and breathe easy
.Attachments
cheers buddy i would appretiate that oh and lurch aka james has been working with me his been a bit of a winger like me last couple weeks.
but thank you very much really needs too be forged
Say "Hi" to Lurch for me when you see him next - he's a good bloke.
If you want a forged 7-bolt crank there's tonnes on ebay.
yeah i see him again tomorrow, i will say hi from you buddy.
i really don't want too deal from usa bad experience that's why i'm trying too find locally its the last peace of the jigsaw along with needing some other stuff for the head like different cams, and springs, and valves, But if i can get the crank it can be dropped off to the shop too be machined then i can save up for stuff for head
.yours trully rsd
