evo 1-3 camshafts

[noodlesqueaker]

Hi can anyone tell me what cams I have they came out of a evo 2 engine eng.4g63opxxxx
Inlet 403241146
Exhast 403240325
cheers

 

[BMGTZ]

if they are aftermarket billet they will have a brand on them. are those numbers on the end near the geabox?....if so they are probably just the mitsubishi numbers.

can you check the lift?.........do that by measuring the base circle and then the full width of the base to the top of the lobe. subtract the lower number from the higher number and multiply by 1.7.

 

[noodlesqueaker]

Cheers for that Yes these numbers are from g/box end will check lift

 

[ONPSI]

I have a set of standard Evo 3 cams at home, i'll have a look at the codes tonight when I get home.

 

[ONPSI]

Evo 3 Intake: 501112202 Exhaust: 501120002 well that's what I have here

 

[EVOCPE]

The ones the OP posted are from an EVO2 then, must be something like a serial number lol

They both have 9 numbers

 

[ONPSI]

well considering they start with a 4 you'd guess that much as I can 100% confirm mine are from an Evo 3