evo 3 fuel pump flow rate

[bozo]

Guys, what is the flow rate of the e3 pump?
looking at fitting bigger injectors (450's) and pump and want
to know if the e3 is a straight bolt on, i know most will say
just get a walbro, but i would rather get the e3 if it means not
running new power wires.
I'm running the 4g93 and will only be running 14psi max as it's
still got the standard rod piston combo.
Thanks Grant.

 

[Lister]

Just get a whinebro thrown in man, more scope for the future than the e3, and quite cheap.

 

[3zercrowd]

The car should handle it as it is......

150KW or more and id change the pump.....

 

[Richard]

How many Km's are on your pump at the moment?
How many km's are gonna be on the EIII pump, anything over 200000 it will be knackered, just get a Walbro replacement, at least you will have a new pump in there.

 

[DOUGMO]

if your worried about th wiring i used an fto loom and it went straight in

 

[bozo]

Thanks guys,
the cars making 121atw at the moment so the idea was to get injerctors,pump,ecu chiped.
So the bigger pump was just to make sure it wasn't the weak link when
the other things went in.
I see your point about the klm's on the pump, i may just get one of those
(whinebro) ones.