EVO 7 competition car

4GTuner

Help Support 4GTuner:

J monk

Member
Joined
Mar 15, 2007
Messages
15
2004 evo 7 GSR. This was our drift car, is currently 2WD but can easily be convereted to 4WD and would make a great tarmac rally car/circut car etc..

specs are as follows
Tomei ECU
SMB dump and front pipe, straight through 3 inch exhaust.
SABER intercooler and pipes
Brembo Brakes
Cusco coil over struts
very comprehensive tower to tower SPARCO chromolly roll cage
Velo seats
TRS 3 inch harnesses
PPG straight cut dog box
PPG RWD locked transfer case (or viscus 4WD transfer case)
RS rear diff, set up by Evo expert Bob Rilley
WRC style push type hydraulic handbrake
Willwood anti knock off brake valve
Nagisa adjustable front lower control arms
Nagisa Bump steer adjustable tie rod ends
Whiteline Bumpsteer adjustable rear toe arms
Charge Speed Wide body front guards
Charge Speed front bar
Charge Speed carbon bonnent (and stock bonnent)
Charge Speed side skirts (and stock ones)
Charge Speed rear bar
17x8 and 17x9.5 Drift tec rims

Looking for 30k
Car is located in Adelaide SA
pm or call me on 0408 539 735

Comes with spare front and rear drive shafts.
note: this car is not complied and cannot be. is only eligable for competition rego.

IMG_8104.jpg

P4011308.jpg

P1010655.jpg
 

Latest posts

Back
Top