EVO1-3 CPU issue

[twdorris]

If you have followed our first announcement thread, you may have seen this post. The "teething issue" mentioned there actually has to do with the CPU used in Brian's (and his brother's) ECU. This page has details.

EVO1-3 CPU Issue

Amazingly, this was the FIRST time someone had used our flash module in an ECU with this particular CPU. Lucky for him. Sorry, Brian!

Anyway, the issue has been fixed now. But if you already have ECMLink in your EVO1-3 ECU, you should open it up and check the CPU for compatibility.

Thomas Dorris
ECMTuning, Inc.

 

[BMGTZ]

"Amazingly, this was the FIRST time someone had used our flash module in an ECU with this particular CPU. Lucky for him. Sorry, Brian!"

no worries Tom. I must say that now these issue are resolved and i can access the ecu. I am even more impressed with this product.

The back up and communication extended to both myself and my brother was outstanding and rarely seen these days.

:thumbsup::thumbsup:

Brian

 

[kenm55]

ECM Link Support

I would also like to to publicly thank Tom for his support and commend him for his service to his product could not be happier with the way my GSR is going at the moment great product :thumbsup:
anyone who wants to try it here in Perth pm me

 

[milkandoj]

No really the right thread but there isnt a vr4 one....

When testing the vr4 package your developing have you also tested an md 165808 ecu as found in the monte carlo edition ect.
They are the last of the breed and the coding is meant to be slightly differnt.

That said i have a chip that works in the 808 and apprently works in the more normal vr4 ecu's.



08/90 - 03/92 Evolution Jspec Galant VR4 (Manual) E39A-02##### SNPF 240(176)@6000 rpm 304Nm @ 3500 rpm MD165808 5spd 3.909 TD05 16G 510cc Y 1350 kg VR4 Evoloution - GSR


08/90 - 03/92 Evolution Jspec Galant VR4 RS (Manual) E38A-02##### SNPF 240(176)@6000 rpm 304Nm @ 3500 rpm MD165808 5spd 3.909 (LSD) TD05 16G 510cc N 1310 kg VR4 Evolution RS - Also known as the EVO 0 or RS-E



08/90 - 03/92 Monte Carlo Galant VR4 (Manual) E39A-02##### SNPF 240(176)@6000 rpm 304Nm @ 3500 rpm MD165808 5spd 3.909 (LSD) TD05 16G 510cc Y 1410 kg Special Luxury Evolution model to celebrate success in the Rally of Monte Carlo


heres the complete list http://www.galantvr4.org.au/public/viewtopic.php?f=46&t=10382

 

[1JUM2NV]

i want one for my jumbuck onces it running.. but wont be for a month or two

 

[twdorris]

When testing the vr4 package your developing have you also tested an md 165808 ecu as found in the monte carlo edition ect.

I believe that ECU is nearly identical to our own 1G DSM (VR4) ECU. So, yes, it should work fine.

Sorry for the late reply. I'm some how missing update notifications from time to time. I just didn't realize there were any new posts.

Thomas Dorris