EVO1-3 fuel tank

[EVO193]

Looks good. Where did you pick up the pump holders or did you knock them up? Where did you pick up the bulk head wire connectors. They look good

 

[ted]

Oohh i like that!! Very nice man!

 

[ENGINR]

Looks good. Where did you pick up the pump holders or did you knock them up? Where did you pick up the bulk head wire connectors. They look good

Cheers mate. I got the tops of the holders water-jet cut by a place down the road from work, I took them one of the original cradle tops and they copied it into their CAD program and then cut the discs and even put the perimeter holes in them for me! Saved me hours and hours of fu**king around at home and I got a professional outcome which I would have never have achieved on my own.

I then took the discs to a fabricator mate on the other side of town with my spare fuel tank and the pumps and he made up the holders. They are real works of art!

The bulkhead wire connectors I got from EFI Hardware, they are stainless studs and come with E85 compatible seals. The wiring harness got made up by an auto wiring guy here in Melbourne who did the motorsport loom in the car.

 

[ENGINR]

Needed to get an additional power module wired into the car to support the extra fuel pumps I now have. Was a little pricier than going with relays and fuses but this is a much simpler, reliable and upgradeable option to take.

I can monitor and control the power output to the pumps and log any errors or abnormalities that might happen.

 

[ENGINR]

Some better shots of the cradle setup. They really are too nice to hide away in the fuel tank!

 

[evopwr]

Damn thats sexy!

 

[ENGINR]

They work too! Fired the car up and got fuel into the surge tank, so i must have done something right.

 

[myevo1]

Nice!

 

[EVO193]

Hey Shanye,

What COP kist are you running and what coils does it use? Nice install

 

[ENGINR]

I'm using the M&W COP kit from GT Pumps with the Autronic 500R CDI unit.

 

[ENGINR]

New fuel system proved itself out on the track. Was able to run two sessions without having to fill up the tank in between runs and got no hesitation or missing under load after heavy cornering.