evo1 Vs GSR sway bar

4GTuner

Help Support 4GTuner:

bennygsr

Well-Known Member
Joined
Apr 10, 2006
Messages
148
Location
Melbourne
Are the stock GSR and EVO 1 rear the same?

If they are differnt sizes, what would the stock size of both be?

Thanks
 
you just have to hold your tongue right to get it in, its not hard just fiddly, the u clamps can be a bit of a bitch to get on sometimes though
 
Which one do you want to order?

I might be selling my 18mm bar, because after I'd already given the ok, to take it out, I find out that my bar is only 1mm wider than the stock evo 1 bar (at 18mm)
 
GSRWRC said:
GSR 14mm
Getting an Evo bar in the rear of a GSR does a lot to reduce their chronic understeer, Whiteline 20mm bar almost eliminates it completely.

Whiteline 20mm rear swaybar + Evo 2/3 16mm front swaybar FTW. This is the set-up on my car and understeer is non-existant, and steering telepathic, compared to 20mm rear + std. Evo 1 front swaybar.

DOUGMO said:
you just have to hold your tongue right to get it in, its not hard just fiddly, the u clamps can be a bit of a bitch to get on sometimes though

True, easy job but fiddly like most DIY jobs on these cars. The front swaybar clamps are so much worse though...
 
Craig_CD9A said:
Whiteline 20mm rear swaybar + Evo 2/3 16mm front swaybar FTW. This is the set-up on my car and understeer is non-existant, and steering telepathic, compared to 20mm rear + std. Evo 1 front swaybar.

what did you need for the evo front sway bar on a gsr? any tips?
 
MatS said:
what did you need for the evo front sway bar on a gsr? any tips?

You'll need front struts with the eyelet for the swaybar link, the Evo 2/3 swaybar links, the swaybar, D bushes for the swaybar and the Evo 2/3 swaybar bracket (not as wide as Evo 1/GSR). Probably not a bad idea changing to the cast front control arms from Evo 2/3 as well, for extra castor.
A tip? Get someone else to do it :p
 
GSR 14mm
Evo I 17mm
Evo II/III 18mm

Getting an Evo bar in the rear of a GSR does a lot to reduce their chronic understeer, Whiteline 20mm bar almost eliminates it completely.

I have a correction to the above.
I'm in the process of changing over mine to a whiteline job and the GSR is 15mm not 14mm. B)
The Whiteline is some great value for the price! Its 20.3mm :p
 

Latest posts

Back
Top