exhaust manifold bolts

[nate108]

hi guys
i am needing to replace the exhaust manifold bolts
on my aspec 91 Galant VR4

does any1 have the mitsi part number
or an aftermarket or another manufactures bolts that will fit
and where can i get them

thanks,

nate

 

[iluszn]

someone mentioned VN commodore ones?? else go to your local Repco and they can look it up..

 

[evopwr]

get s.s. studs with copper coated nuts. makes life that much easier to take off next time round.

 

[nate108]

get s.s. studs with copper coated nuts. makes life that much easier to take off next time round.

where can i get these

and what size do i need?

im driving my car everyday
and will do it on the weekend so id prefer to get all the bolts etc before i start work on it

thanks

 

[brisvr4]

Exhaust studs are M8x1.25. I got mine from my local exhaust place.
Nice and cheap and they work.

 

[youda]

supercheap, in stock usually. bout three bucks each

 

[nate108]

Exhaust studs are M8x1.25. I got mine from my local exhaust place.
Nice and cheap and they work.

cheers

 

[brisvr4]

Make sure you get some Nickel antiseize as well.

 

[andy's-galant]

yep as p.m'ed i recently got some from auto1, i took one the vr4's then they had a look, i think it was from a VT commy they matchd up, and the stud was about 2-3mm shorter but there was still enough grab, make sure put some thread locker on the head side, and some locktite washers as the bolts can loosen with heat.
Cheers

 

[murray]

got mine from mitsubishi, they had them on the shelf, cant remember how much

 

[Jonson]

GT pumps sell them. Nice and easy.