forged 4g93, and performance bits

4GTuner

Help Support 4GTuner:

Status
Not open for further replies.

boosted22

Member
Joined
Mar 3, 2010
Messages
76
Location
SA
forged gsr 4g93, forged rods, arias pistons, arp bolts, modified std cams, was told it has been oringed, and head is ported, but engine is still complete in the car so can't confirm as yet, was making 220kw atw on low boost, car was a full street car which I drove for a week before stripping to turn into a circuit car, engine ran sweet before and has not been fired since so hence price $900- bare engine only.... I'm unsure the ks exactly but when I brought it he told me in the last 5 years the car has seen less 8000ks, that's why I got it.
located country sa.
email me on [email protected]

More goodies too come,
Microtech, front mount, custom manifold and garrett turbo, fuel rail injectors etc.

microtech lt10, and loom too suit 4g93t has a current tune all ready, I will try pull apart carefully so the wiring loom is a simple plug in and go for the next owner $500

full tuned length manifold, with a Garrett gt3040 turbo, turbosmart wastegate $1500

full gsr rear  cradle, diff, hubs, callipers, etc whole thing $400

front mount cooler with custom piping, front mount runs down from the throttle body under the front rail on the drivers side into the front mount then out the front mount back around under along the radiator and fmic then straight up and around into the turbo
$300

full 3 inch exhuast from turbo, Garrett flange on the end but could be changed $250

Gsr gearbox, I was told by the owner that it has a ppg standard gear set, ? but I'm unsure how to check this, it's just what he said $? if there's a way I can check with out pulling the whole box apart so it's good for nothing then, let me know.

apexi avc boost controller, got it with the car he hadn't got around to installing it yet, has the unit it self the boost solenoid, all wires look intact and good length hose, no box or instructions $250

intake manifold, with a custom fuel rail setup with big Rochester injectors, malapassi fuel reg $500

are surge tank which looks around 2ltr mark with 2 Bosch 984 pumps which i belive flow a little less than the 044, fittings etc the normal gsr tank pump was used as the surge feed. $300

iphonephill015.jpg

iphonephill018.jpg

iphonephill017.jpg

iphonephill023.jpg

iphonephill020.jpg

iphonephill022.jpg

BgvEN0QB2kKGrHqMOKiMErzEoosO9BLGdHz.jpg
 
Possibly interest in gear box, will check my mechanic to see if or how we can determine if the box has a PPG set


been informed that ppg dont make a standard gear set, and it defiantly wasnt a straight cut box, so might been jibbed there, i all ways knew there was no way to comfirm on the moment and just had to go with what the fella told me.
 
the car was a complete running street reg car, which I drove all the way back from Queensland to sa, drove it for a week then started stripping it for a circuit car, was nothing wrong then and was running sweet.

hey guys il repley too all pms tonight ok, but like i said there was nothing wrong with the car it was a full street car before i stripped it, i payed 10gs for it, thats the honest truth not out to scam any body, if your unsure dont buy, im keeping the shell for later years but im moving and buying a property, but i need cash to finish my house first to sell it, thats all. if there was some thing wrong with any thing it is beond what can see or know, would never wanna scam any one.

make a offer on the gear box im unsure what its worth, the guy told me it was rebuilt with a ppg gear set but they dont make standard sets ? so could be a good box or could be just a dead stock one, ethier way it was a fine box and drove home from queensland and for the next week, with no dramas as too the motor. cheers guys
 
sorry for the late repley guys my pop past away, had alot on since, sorry for all interested came across a gsr too good not to buy, so now gonna transfer all into this, for a good play and work car, thanks again too all interested sorry, mods please remove this post or some thing..
 
dang when you have the cooler pipes outa the car can you get me some more detailed photos or even some copies made up. im sitting here scrathcing my head about how to run the piping for my 93t conversion.

and sorry to hear about the loss. good luck with the new car.
 
sorry for the late repley guys my pop past away, had alot on since, sorry for all interested came across a gsr too good not to buy, so now gonna transfer all into this, for a good play and work car, thanks again too all interested sorry, mods please remove this post or some thing..


let me know if you change your mind....I need a motor.
 
Status
Not open for further replies.

Latest posts

Back
Top