FOUND: Evo 1-3 motor, harness, loom suitable for conversion into CC GSR

[qik_shift]

Hi all,

My 4g93 has given up the ghost and rather than rebuild it I am considering getting an Evo 1-3 motor to fit in. This is a car I use daily at times so I don't have the luxury of time.

I would need a motor complete with all parts necessary to complete the conversion. I assume I can buy the engine mount via Meek but I need other parts such as:
an ECU to suit, a motor in a condition that doesn't require major mechanical work, air conditioning compressor, alternator, wiring harness etc.

I've tried calling a couple of shops but haven't had success finding anything so far.

Anybody able to assist?

Thanks,
Chris

 

[BMGTZ]

Hi all,

My 4g93 has given up the ghost and rather than rebuild it I am considering getting an Evo 1-3 motor to fit in. This is a car I use daily at times so I don't have the luxury of time.

I would need a motor complete with all parts necessary to complete the conversion. I assume I can buy the engine mount via Meek but I need other parts such as:
an ECU to suit, a motor in a condition that doesn't require major mechanical work, air conditioning compressor, alternator, wiring harness etc.

I've tried calling a couple of shops but haven't had success finding anything so far.

Anybody able to assist?

Thanks,
Chris

regards Air con you will also need the compressor hoses as well...because the ac compressor is in a different spot.

 

[qik_shift]

regards Air con you will also need the compressor hoses as well...because the ac compressor is in a different spot.

Thanks for the advice. Much appreciated

 

[Gianni]

I have an Na 4g63 I'll be getting rid of in a few months bias loom and ecu with it. Runs great. U can turbo that if u want. But it does depend on what u want.

 

[(2much)]

you have a pm

 

[EVOCPE]

FATWGN on the forum is parting out his 4G63T coupe, he has all the parts needed such as engine, and it has Tomei cams and cam gears, but not sure about A/C

PM him

 

[DOUGMO]

i have a/c hoses and compressor

 

[qik_shift]

I have an Na 4g63 I'll be getting rid of in a few months bias loom and ecu with it. Runs great. U can turbo that if u want. But it does depend on what u want.

Hi Gianni thanks for he offer but I'd prefer to stick with a motor that is turbo in standard form.

FATWGN on the forum is parting out his 4G63T coupe, he has all the parts needed such as engine, and it has Tomei cams and cam gears, but not sure about A/C



PM him

Will take a look now. Cheers for the tip.

Will respond to PM's ASAP.

Thanks for all the help so far.

 

[EVOCPE]

Still after this motor, loom, ecu, engine mount setup??

http://www.4gtuner.com/index.php?/topic/17610-parting-out-an-awd-cc-lancer-coupe/

 

[qik_shift]

Still after this motor, loom, ecu, engine mount setup??

http://www.4gtuner.com/index.php?/topic/17610-parting-out-an-awd-cc-lancer-coupe/

Sorted Thanks for everybody's help on this. One more part to go and I should be right. New post coming up!