FOUND: EVO 1-3 transfer case

4GTuner

Help Support 4GTuner:

Status
Not open for further replies.

bazza3954

Well-Known Member
Joined
Dec 11, 2009
Messages
51
Location
Brisbane
Chasing a good transfer case to suit manual gearbox in EVO 1-2. Gearbox is a W5M332WQWE which is EVO 1 and rear diff is 3.909. I am therefore chasing a 1.090 transfer case. Prefer Brisbane or SEQ but consider anything. Thanks Bazza.
 
Hi Bazza, you have to be a bit more specific and careful which one you ask for as it depends on the gearbox you are running to suit your EVO 3.909 rear diff ratio.
EVO 1 and 2 run a 1.090 transfer case ratio
EVO 3 runs a 1.074 transfer case ratio
If you put an EVO 3 transfer case on an EVO 1 or 2 gearbox you're screwed with mix-matched gearing.
Do you know what gearbox you have? The last 4 letters on the top line of the gearbox bellhousing is the code.
 
bazza3954 said:
Chasing a good transfer case to suit manual gearbox in EVO 1-3. Prefer Brisbane or SEQ but consider anything. Thanks Bazza.
Can you also please put your location in your User CP for us. Ta.
 
Gearbox is W5M332WQWE and rear diff is 3.909 so I guess it's 1.090. Thanks for the heads up, Brian.
 
That helps heaps Brian
You have an EVO 1 gearbox with factory viscous front LSD so you definitely need a 1.09 transfer case if running the 3.909 rear diff.
You can use the transfer case from a 1.8 GSR Lancer AWD, EVO 1 or EVO 2 as they all have the 1.09 transfer case ratios.
Its the EVO 3 gearbox that needs its own different transfer case ratio of 1.074.
Hope that helps mate.
 
yea fair call, but i hear people in perth are weird, kiddin bro,


not sure i shoulda posted that, now all the perth fellahs are gunna hate me,
 
Status
Not open for further replies.

Latest posts

Back
Top