FS: Brembo Front Brake Calipers from EVO X

[wesleyong]

PRICE DROP $950$850. FIRST COME, BEST DRESSED!

Hey all,

For sale are a pair of front Brembo calipers from an EVO X.

The Evo X calipers are larger than previous Evo calipers and house a bigger rotors.

They are pretty much a BOLT ON upgrade, the bolt holes in the calipers need to be telecoiled, or the easy way is slight increase the bolt hole size on your caliper hub mounts! (SUPER EASY!) Rotors from an Evo X are direct fit, no mods.

A great upgrade for Evos or Galant / Legnum VR4s. They are in great condition, with only a couple of paint nicks (from removing wheels) and the common slight peeling of the clear coat, but that is an easy fix with a can of caliper gloss coat from Autobarn ($16).

These calipers are a rare find as they are off the current model Evo and therefore are low kms and in good condition.

$1200 ono + $50 delivered Australia-wide. Pickup available Brisbane/Gold Coast.

Contact Wes on 0401 056 582 or mail[at]wesleyong.com

 

[wesleyong]

Another quick note, 18" rims will be required.

For wheel info, this site is helpful: http://www.evoxforums.com/forums/showthread.php?t=10191

 

[wesleyong]

PRICE DROP

 

[wesleyong]

Offers considered, send me an email, SMS or PM!

 

[boost_lover]

Why the sale?

 

[milkandoj]

They are pretty much a BOLT ON upgrade, the bolt holes in the calipers need to be telecoiled, or the easy way is slight increase the bolt hole size on your caliper hub mounts! (SUPER EASY!) Rotors from an Evo X are direct fit, no mods.

A great upgrade for Evos or Galant / Legnum VR4s.

To clarify....
These bolt up to a HH vr4?

Or bolt up swap to earlier evo's?

 

[wesleyong]

Hey,

I bought them for my Legnum VR4, which unfortunately was in an accident before I could put them on. In fact, it is this very car here: http://cgi.ebay.com.au/mitsubishi-legnum-vr4-wagon-awd-damaged-NO-RESERVE-EVO-/220664446724?pt=AU_Cars&hash=item3360a03f04

They won't bolt onto HH without mods. Direct bolt on to Evo 4-9 etc.

Thanks,

Wes

 

[DOUGMO]

are you 100% they bolt up to 4-9?

 

[wesleyong]

are you 100% they bolt up to 4-9?

Yes. All you need to so is either helacoil the calipers or enlarge bolt hole size on your caliper mounts. Easy as!

 

[ENGINR]

Do it George!! Then sell me your 2-piece rotors when you go for a bigger size.... :lol:

 

[wesleyong]

BUMP make an offer

 

[wesleyong]

BUMP All offers considered.