Guys,
I have big brake setup to suit
EVO1-3
1.8 GSR's
CORDIA's
MAGNA's
Galants
I only have the:
2x camaro calipers (rebuilt)
1x set of pbr front pads (new in box)
1x pair of billet alloy mounts (camaro calipers to mitsu hub)
1x pair of hubcentric rings (mitsu hub to ford rotors)
1x set of bolts and washers
Will require:
2x 330mm disks (part number will be provided or can supply for additional cost) & redrilling to suit 4 stud pattern.
2x braided brake lines to suit the car to the caliper (can supply for additional cost)
May sell my rotors on the VR4 (used for about 2000km's) as I may consider going 2 peice alloy.
These brakes are huge!
They need 17" minimum wheels!!!
My Enkei's barely clear the brakes!
It's a huge improvement over stock and the brake bias is still very good. It stops my Galant on a dime!!
Reason for sale: I was going to use it on my brothers AMG Galant but we will need to run the smaller rims wheel on the car due to being FWD.
Price - $700.00
Rotors and lines will cost an additional 300 - 500 depending on brand.
Can fit for small fee. (Local)
PM me for more details or email me
baleng @ optusnet dot com dot au
NOTE: Picture below is not the exact setup. Below are corvette brakes, the Camaro have larger pistons and don't have any text. Also the Camaro are not painted (alloy in colour).
I have big brake setup to suit
EVO1-3
1.8 GSR's
CORDIA's
MAGNA's
Galants
I only have the:
2x camaro calipers (rebuilt)
1x set of pbr front pads (new in box)
1x pair of billet alloy mounts (camaro calipers to mitsu hub)
1x pair of hubcentric rings (mitsu hub to ford rotors)
1x set of bolts and washers
Will require:
2x 330mm disks (part number will be provided or can supply for additional cost) & redrilling to suit 4 stud pattern.
2x braided brake lines to suit the car to the caliper (can supply for additional cost)
May sell my rotors on the VR4 (used for about 2000km's) as I may consider going 2 peice alloy.
These brakes are huge!
They need 17" minimum wheels!!!
My Enkei's barely clear the brakes!
It's a huge improvement over stock and the brake bias is still very good. It stops my Galant on a dime!!
Reason for sale: I was going to use it on my brothers AMG Galant but we will need to run the smaller rims wheel on the car due to being FWD.
Price - $700.00
Rotors and lines will cost an additional 300 - 500 depending on brand.
Can fit for small fee. (Local)
PM me for more details or email me
baleng @ optusnet dot com dot au
NOTE: Picture below is not the exact setup. Below are corvette brakes, the Camaro have larger pistons and don't have any text. Also the Camaro are not painted (alloy in colour).
