FS: RANDOM PARTS...

4GTuner

Help Support 4GTuner:

SIKWPN

Well-Known Member
Joined
Aug 6, 2005
Messages
355
Location
Melbourne
1x 4G63 100mm 2.3lt STROKER CRANK TO SUIT EVO 1-9 BLOCK ( HAS BEEN CRACK TESTED ETC.. READY TO USE ) $300

1x EVO III BLOCK COMES WITH CRANKSHAFT ( one wall has marks on it .. suit rebuild ) $100

1x EVO 3 inlet Manifold with EGR $120

1x GSR AIR FLOW METER $30

1x SET EVO 1-3 FLAT SIDE INDICATORS $30

1x 25mm Pedders front sway bar to suit GSR & EVO1 ( never used as they gave me the wrong one for my car) $70

1x STREEING RACK (not sure its an EVO or GSR ) $30

1x X-FORCE 3' Cannon with custom 3' press bend cat back but no flange where the cat is $30

1x CUSCO REAR STRUT BRACE TO SUIT GSR/EVO1-3 $150

1x EVO 1-3 UNDER BONNET HEAT SHIELDING ( just the alloy bit under the vents ) $30

1x SET AUTOMETER SILVER FACE BOOST, OIL, WATER WITH CHROME CUPS & 5' MONSTER TECHO WITH SHIFT LIGHT $500

2 x 10lb NOS BOTTLE WITH 1 KIT ( never use ) $900 the lot

1x SET TEINS FLEX in perfect condition, been on the car for few months, doesnt come with C spanners as i lost it ) $1,600

1x EVO 3 4G63 ENGINE LOOM $150

1x EVO LSD FRONT LEFT HALF SHAFT (which is alittle shorter and thicker then non lsd shaft ) $100

1x EVO 3 NON MECHANICAL FRONT DIFF $OFFER?

1x EVO 3 FRONT CENTER DIFF $350

1x 235/45/17 FALKEN ZIEX ZE 326 TYRES 80% LEFT $100

1X 235/40/18 FALKEN ZIEX ZE 326 TYRES 80% LEFT $100

4 x DRIFT GAUGES, BOOST, WATER TEMP, AIR/FUEL RATIO AND OIL $OFFER?

1x EVO 3 FRONT ALLOY UNDER TRAY ( STONE SHIELD VERY RARE ) $150

1x HAYMAN REESE TOW BAR COMPLETE WITH TOW NECK NO BALL TO SUIT LANCER CC/GSR/EVO1-3 $150

1x SET EVO 3 OZ RACING 15' WITH GOOD TYRES ( rim has been powder coded white, they are in perfect condition no scratches ) $650

1X SET 17x7 AVS 6 GOLD 4 STUD $900

1X EVO 3 BUZZ SPEED ECU FROM JAPAN $250

1X FRONT BRACKETS TO SUIT GTO 4POT CALIPERS 315mm DISC ON TO GSR/EVO1-3 HUB $250

1x EVO 3 FRONT LEFT AND RIGHT LOWER CONTROL ARM $250

1x SET EVO 3 FRONT LEFT AND RIGHT CALIPER & PADS $150

1X SET FRONT EVO 3 HUB $120

PARTS LOCATED: Springvale & Bayswater

CONTACT: PM

PIC: will post them up when i have time and more parts will be added soon :rolleyes: :


Thanks :D
Mike

ps, for those who wants a closer photo shot or anything, please inbox me with your email i will sent them to you..
 
Interested in this if you have a part number? Need to check it will bolt up to the GTi?


1x 25mm Pedders front sway bar to suit GSR & EVO1 ( never been use as they gave me the wrong one) $80

Cheers
 
Can you do a deal on viscous LSD and LSD cup?

sorry mate its a non LSD FRONT DIFF and its a half shaft not the drive shaft..

Interested in this if you have a part number? Need to check it will bolt up to the GTi?


1x 25mm Pedders front sway bar to suit GSR & EVO1 ( never been use as they gave me the wrong one) $80

Cheers

sorry i dont have the part number anymore as it been sitting around for the past 6yrs, mayb give pedders a call and ask them, all i know it will bolt up to any GSR n EVO 1 as the EVO 2 - 3 runs diff set up..
 
Grant..they are at bottom of the first post. I was going to ask the same but caught sight of them beforehand .. He also states in first post if anyone wants close ups to pm him email addy ..
 
Interested in this if you have a part number? Need to check it will bolt up to the GTi?


1x 25mm Pedders front sway bar to suit GSR & EVO1 ( never been use as they gave me the wrong one) $80

Cheers

are you still in mate?? havent heard nothing back?
I'll grab the pedders sway bar for my evo1 if the other guy doesn't take it.

i give him till tonight, cos he never said anything about holding it or not taking it, by tonight you can come pick it up..
 
Hi Guys,

If you are close go for it, I've looked on the pedders site and am unsure about compatibility.

Thanks for holding for me anyway.

Cheers all
 

Latest posts

Back
Top